Claescaster

Tag: Made in Sweden

ARTEC MHFC93

Levin Model 32 Made in Sweden 1946, Artec MHFC93-CRLevin Model 32 made in Sweden by Levin in 1946

I’ve finally received my Artec MHFC93-CR from EY Guitar, the order got lost and took 3 months to arrive. Last weekend I got around to install it on my 1946 Levin Model 32 and I’m pretty impressed with how good it sounds for being so inexpensive.

Levin Model 32 Made in Sweden 1946, Artec MHFC93-CRUnfortunately I had to remove the pickguard, well it was actually quite annoying and always in the way when I played so it was more of an aesthetic loss. I also installed an old vintage strap button while I fitted the pickup so now the guitar is ready to be gigged.

Levin Model 32 Made in Sweden 1946, Artec MHFC93-CRThe installation was pretty straight forward in the end but it took a bit of figuring things out so I completely forgot to take more pictures. First I made a small hole under the fretboard extension on the right side, where the cable from the pickup could enter the body without being visible. Then I drilled a hole for the endpin jack, just like a do when I install the endpin jacks for my LR Baggs, with a 1/2 inch or 13 mm flat spade drill bit straight through the end block. I measured two cables from the endpin to the f hole, fished them up before I cut them and then soldered them to the endpin while taped to the top for not disappearing inside. Once the cable from the pickup was fished up I checked which was which and then soldered them together and stuck them to the top on the inside with a little clip on the bottom side of the f hole so they can’t be seen. 

Artec MHFC93-CRArtec is perhaps not the worlds fanciest brand, especially not if you judge them by their website, but I like them and they sound very good for being so cheap.

I will get a video up as soon as possible

Happy New Year!

It’s been a great year for the Levin collection. Let’s hope that 2016 will be even better. Happy New Year everyone!

Levin CollectionLevin LT-14 (1965), Levin Goya T-16 (1965), Levin Goya T-18 (1966), Levin Goya T-23 (1966), Levin Rondo Model 29 (1960), Levin LT-16 (1966), Levin LS-16 (1963), Levin LM-26 (1959), Levin Model 65 (1942), Levin Model 13 Ambassadör (1950), Levin Model 32 (1946), Levin Model 3 Royal (1951), Levin W 12-36 (1978), Levin Goya Model GG-172 (1970), Levin Goya Model 163 (1968), Levin Model 174 (1972)

Levin LS-16

Levin LS-16 Made in Sweden 1963Levin LS-16 Made in Sweden in 1963

I was offered to buy a 1963 Levin LS-16 from a Swedish collector just before Christmas last year. Of course I jumped on the chance, not only is it a really rare bird, most of them were branded Goya S-16 and sent off to the US, but I had also been looking for another guitar like my dad’s old 1966 Levin LT-16 for quite a while. Unfortunately this Levin LS-16 got stuck in Sweden for a year, my mum didn’t want to send it so I couldn’t bring it back to Spain until I went back home for a funeral now in November. In the time of it’s absence I managed to find and restore a really nice sounding 1965 Goya T-16  so now I suddenly have 3 Grand Concert sized Levin guitars from the mid-60’s. Not that I complain, I really like both the sound and the playability of these guitars and this last one is probably the best sounding of all of them. According to Vintage Guitars Sweden, the most resourceful site about Levin guitars, the main difference between the Levin LS-16 and Levin LT-16 is the bracing pattern. The LS is supposed to be ladder braced but mine is X-braced just like the LT-series, I think that became standard in the early 1960’s. They also have different machine heads, dot inlays in the fretboard and I think that the LS-series have a bit more V-shaped neck profile.

Levin LS-16 Made in Sweden 1963Levin LS-16 Made in Sweden 1963

Levin LS-16 / Goya S-16
Grand Concert size: Body width: 380 mm, body length: 480 mm, body depth: 98 mm. Fingerboard width: 43 mm, scale length: 630 mm. Spruce top, mahogany back and sides, 4-ply bound top, single-bound back. Mahogany bolt-on neck with adjustable truss rod. Metal Levin truss rod cover with a star and “1900”. Single-bound rosewood fingerboard with centered pearl dot inlay. Rosewood bridge, nickel plated strip tuners. Natural finish and ten year warranty

 

Guitars for sale

Martin SPD-16R Made in USA1999Martin SPD-16R, Made in USA 1999, 1500€ 1300€
Martin SPD-16R is a Special Edition Dreadnought from Martin guitars. Spruce top and Indian Rosewood back and sides with forward shifted scalloped X bracing. Performance taper, low oval mahogany neck with rosewood fretboard and bridge. Snowflake inlays, abalone rosette and a D-45 style back strip with gold Martin stamped machine heads. Produced in USA between 1996-2001. The guitar is in fantastic shape for being 18 years old with hardly any scratches and no fretware. The top has a hairline crack from the bridge down which has cracked the lacquer but not the wood. SPD-16R stands for Special edition, Dreadnought, 16-series in Rosewood. This guitar looks great and sounds amazing, you can read more about it here and listen to it in this Youtube clip.

Gibson J-45 ADJ 1965 Made in USAGibson J-45 adj, Made in USA 1965, 2300€ SOLD
An awesome looking Gibson J-45 ADJ, built in the Kalamazoo factory in 1965. It’s the classic round shouldered Gibson dreadnought, natural finish spruce top, mahogany back and sides, rosewood fretboard and bridge. All original except for the refinish which turned this J-45 in to a J-50. Apparently this was done in the early 1970’s when the slight separation in the tops mid seam was glued. The guitar looks really great, worn but still well preserved for being 50  years old. The sound is just amazing, it has that typical Gibson bass response that you can hear on the early records of James Taylor and Jackson Browne. I cut a new bone saddle for it but it comes with it’s original adjustable rosewood bridge. It has an endpin jack already installed so it’s ready to play live, just ad a pickup. A brand new flight case is included to protect the guitar. The action is low and there are no structural issues with this guitar, just the normal marks and scratches. You can read more about the guitar here and listen to it in this Youtube clip.

Gibson B-15 Made in USA 1969Gibson B-15, Made in USA 1969, 1200€ SOLD
This 1969 Gibson B-15 sounds and plays great and is pretty good shape for it’s age. There is a lot of scratches and wear to the top and sides but the are no cracks or structural issues. It’s all original and even comes with the Gibson made alligator chipboard case. The action is good and the frets has very little wear. The B-15 was an all solid model with a natural finished mahogany body, a mahogany stained spruce top and rosewood fretboard and bridge. Gibson referred to the B-series as student models at the time which is a bit misguiding considering what a student guitar sounds like today. These have great even tone and pretty amazing sustain for the size, a perfect little blues machine. You can read more about the guitar here and listen to it in this Youtube clip.

Harmony Monterey, Made in USA 1950's 784H1325Harmony Monterey H1325, Made in USA 1950’s, 550€ SOLD
Very cool looking US made archtop from the late 1950’s. Solid spruce top with birch back and sides, 16 1/2 in wide grand auditorium size, steel reinforced neck. This guitar is all original and even comes with the original case. There is a glued crack on the side but no other issues. It sounds great, loud and clear acoustically. You can read more about the guitar here and listen to it in this Youtube clip.

K. Yairi YW-1000 Made in Japan 1973K. Yairi YW-1000, Made in Japan 1973, 1700€ SOLD
This is the top of the line, the fanciest guitar that K. Yairi built. Their Martin D-45 copies are legendary for their sound and build quality. This guitar has real Brazilian Rosewood back and sides and a beautifully aged solid spruce top. Real abalone inlays all around and the typical Martin volute where the head and neck meet. At the moment this guitar has Wilkinson WJ28NGD open gear machine heads in gold fitted but I still have the original K. Yairi machine heads. It’s all original except for the bridge which is a brand new hand cut and shaped replacement in ebony with a bone saddle and ebony bridge pins. The guitar is in great shape for being 43 years old but there are a couple of scratches to the top, one big one close to the bottom. The neck is straight, trussrod works and the action is low. The guitar sounds amazing, so deep and clear at the same time. These K. Yairi YW-1000 are extremely rare in Europe and without any doubt the closest you can get to a real 1970’s Martin D-45. You can read more about the guitar here and listen to it in this Youtube clip.

Morris W-50 1970's Made in JapanMorris W-50, Made in Japan 1970’s, 700€ SOLD
Nice Martin D-42 copy with real abalone hexagon inlays and the typical Martin volute where the head and neck meet. Solid spruce top with nice inlays all around and a beautiful 3-piece back with flamed maple and dark rosewood. The guitar is all original and in really good shape for being over 35 years old but with some scratches, one slightly larger on the top. The neck is straight, trussrod works and the action is low. The guitar sounds great, very clear and Martin like. You can read more about the guitar here and listen to it in this Youtube clip.

Morris W-50 1970's Made in JapanMorris W-50, Made in Japan 1970’s,650€ SOLD
Great looking Martin D-42 copy with snowflake inlays and the typical Martin volute where the head and neck meet. Solid spruce top with nice inlays all around and a beautiful 3-piece back with flamed maple and dark rosewood. The guitar is all original and in really good shape for being over 35 years old but with scratches and marks around the body. It has Wilkinson WJ28NGD open gear machine heads in gold installed now but the original will be included. The neck is straight, trussrod works and the action is low. The guitar sounds great, very clear and Martin like. You can read more about the guitar here and listen to it in this Youtube clip.

Morris W-40 1973Morris W-40, Made in Japan by Terada 1973, 500€ SOLD
A pretty early Morris and a very nice looking Martin D-45 copy, made by Terada in Japan, the factory that makes Gretsch and Orville. Solid spruce top with a really nice 3-piece back of Brazilian rosewood and maple. The inlays are real abalone hexagon inlays and I still have the original machine heads if chrome is preferred to gold. It has it’s fair share of scratches and has been played a lot over the past 42 years but it has no cracks or issues. The neck is straight, trussrod works and the action is low. The sound is just amazing, really deep bass but with good clarity and great projection. It has a endpin jack fitted and a strap button so it’s ready to be gigged with straight away, just fit a pickup. It’s still one of my favourites but now I have too many Morris guitars and have to get rid of some. You can read more about the guitar here and listen to it in this Youtube clip.

Morris WL-35 Made in Japan 1970'sMorris WL-35, Made in Japan 1970’s, 400€ SOLD
A really cool looking Johnny Cash Guild copy. It’s in great condition except for one flaw, the end pin has been pushed in at one point and cracked the lacquer. It’s not as bad as it sounds and it doesn’t really affect anything but I thought it would be worth mentioning. I’m pretty sure it’s mahogany back and sides, it has a really warm and nice sound and is a great playing guitar. It has a endpin jack fitted and a strap button so it’s ready to be gigged with straight away, just fit a pickup. You can read more about the guitar here and listen to it in this Youtube clip.

K.Yairi TG-40 Made in Japan 1977K. Yairi TG-40, Made in Japan 1977, 700€ SOLD
A very rare and unique K. Yairi copy of the famous Guild D-40, which itself was introduced in the Sixties as a competitor to Gibson’s J-45. The Guild D-40 became famous as the Bluegrass guitar for their even response over all the strings and I have to say that this K. Yairi TG-40 sounds amazing. Solid spruce top, sides and back in solid mahogany, neck in Honduras mahogany, bridge and Fretboard in black ebony. The guitar is all original except for the pickguard, which was replaced with an official Guild pickguard, the old one was cracked. It has an end pin jack and strap button fitted and at the moment Wilkinson WJ-309 Art Deco machine heads in gold but I still have the original machine heads if chrome is preferred to gold. The top and back has a few scratches but no structural issues. It plays really well and has an amazing tone, very loud and clear with a great punch in the mid-range. You can read more about the guitar here and listen to it in this Youtube clip.

K. Yairi YW-130 Made in Japan 1977K. Yairi YW-130, Made in Japan 1977, 550€ SOLD
This is a quite accurate Martin D-28 copy made in Japan by K. Yairi in 1977. It’s really light and beautiful sounding, very responsive and a joy to play. Solid spruce top, rosewood back and sides with a smooth ebony fretboard. It has it’s fair share of scratches and a couple of dents to the top but no cracks or issues. The neck is straight, trussrod works and the action is low. The sound is great, very clear with great harmonics. It has a strap button fitted and at the moment Wilkinson open back machine heads in gold but I still have the original machine heads if chrome is preferred to gold. You can read more about the guitar here and listen to it in this Youtube clip.

IMG_9283Levin Model 13 Ambassadör, Made in Sweden 1950, 600€ SOLD
This is a beautiful Levin Model 13 Ambassadör, hand built in Gothenburg Sweden in 1950. If you are not familiar with this classic Swedish brand Levin, click on the link to read more about it. It was restored a few years ago by GammelGura, a great luthier in Örnsköldsvik, Sweden. With new bronze frets, a neck re-set, cracks glued and a new bridge was created to improve the intonation, the rest is all original. It even has the sticker on the back of the head from the guitar shop in Örnsköldsvik where the guitar was bought 65 years ago. It’s a fairly small ladder braced 12-fret guitar with a big sound because of the body width, 400 mm. All solid woods, as always with Levin. Spruce top, walnut back and sides, 4-ply bound top, single-bound back. Mahogany neck with non-adjustable T-shaped duraluminum truss rod. Single-bound rosewood fingerboard with 18 frets and pearloid dot inlay. Single-bound headstock, rosewood bridge, nickel plated individual tuners. Sunburst finish, very similar to the Gibson sunburst of the 1940-50’s, and 10 years warranty. You can read more about the guitar here and listen to it in this Youtube clip.

Levin Model 65 parlour guitar Made in Sweden 1942Levin Model 65, Made in Sweden in 1942, 550€ SOLD
A nice little parlour guitar from Levin, made during World War II in Gothenburg Sweden. It’s just 315 mm wide so it’s a perfect little ladder braced blues machine. All solid woods, spruce top, birch back and sides with walnut fretboard, brass machine heads and nickel plated tailpiece. The guitar is all original, I carved a new bridge for lowering the action but the original will be included in the sale. The neck is really fat and nice and feels great to play. A perfect parlour for blues picking. You can read more about the guitar here and listen to it in this Youtube clip.

Hagström Western 6 Made in Sweden 1978Hagström Western 6, Made in Sweden in 1978, 650€ SOLD
A very rare Hagström Western 6 Missouri made in 1978 by Bjärton in Bjärnum in the south of Sweden. Bjärton were the second largest guitar manufacturers in Sweden after Levin, and they produced all the acoustic instruments for Hagström. It’s both stunning to look at, a joy to play and it sounds great. It has the same head, fretboard and inlays as the legendary Hagström Suede electric guitars had in the 1970’s. Spruce top with X-bracing, mahogany back and sides. 4-ply bound top and bound back. Unbound ebony fingerboard, rosewood bridge, mahogany neck. Matte natural finish and 10 year warranty, which was only give to the top end models. You can read more about the guitar here and listen to it in this Youtube clip.

Hagström B-60 Made in Sweden 1975Hagström B-60, Made in Sweden by Bjärton in 1975, 500€ SOLD
This great looking Gibson J-50 copy was made in 1975 by Bjärton in Bjärnum in the south of Sweden. Bjärton were the second largest guitar manufacturers in Sweden after Levin, and they produced all the acoustic instruments for Hagström. It’s made out of all solid woods and it’s a very nice sounding guitar, even though it has a bolt-on neck, I guess the solid woods and massive neck block is helping with the sound. Spruce top with X-bracing, mahogany back and sides with a nice mahogany bolt-on neck, unbound rosewood fingerboard, Single-bound top and back, rosewood pin bridge. Van Gent machine heads, just like Levin, natural finish and 10 year warranty, which was only give to the top end models. You can read more about the guitar here and listen to it in this Youtube clip.

Goya T-16

Levin Goya T-16 Made in Sweden 1965Goya T-16, made in Sweden by Levin in 1965

I finally managed to get another Levin LT-16, just like my dad’s old guitar that I learned to play on as a kid. His is a 1966 Levin branded one and this one is from 1965 and has the Goya logo on the head stock. These guitars normally don’t come up for sale that often, I guess because they are really well sounding and perhaps the 000-size is very sought after too. It took two years but finally I managed to get my hands on one, in bad shape when it arrived but now fully playable again.

Levin Goya T-16 Made in Sweden 1965Levin Goya T-16 Made in Sweden 1965Levin Goya T-16 Made in Sweden 1965

Levin LT-16 / Goya T-16
Grand Concert size: Body width: 380 mm, body length: 480 mm, body depth: 98 mm. Fingerboard width: 43 mm, scale length: 630 mm. Spruce top, mahogany back and sides, 4-ply bound top, single-bound back. Mahogany bolt-on neck with adjustable truss rod. Single-bound rosewood fingerboard with bass side pearloid dot inlay. Rosewood bridge, nickel plated individual Van Gent tuners with metal buttons. Matte natural finish and ten year warranty

Levin Goya T-16 Made in Sweden 1965There was quite a lot of work on this one. First I re-hydrated the guitar for a week, just a wet sock in a bowl inside, which made the cracks close up quite a lot. I removed the bridge and the pickguard and glued all the cracks on the top and reattached the back that was coming loose. I also flattened the top, it had a bit of a belly that I managed to get down with a flat piece of wood covering the top that I clamped down for a couple of days.

Levin Goya T-16 Made in Sweden 1965I re-glued the bridge and replaced the 10 cm of missing binding. Someone had also sanded down the neck, which I hate, so lacquered it with a couple of coats of Nitro and sanded it smooth. 

Levin Goya T-16 Made in Sweden 1965Levin guitars normally lack side dots for the 9th and 12th fret, which always confuse me while playing, so I added 3 dots. I reattached the pickguard and cleaned up the original Van Gent machine heads. Levin uses a rather clever bolt-on neck system which makes neck-resets very easy. You just loosen the two bolts inside and then you can sand down the heel, it takes time but it was easier than removing the whole neck.

Hagström B-60

Hagström B-60 Made in Sweden 1975Hagström B-60, made in Sweden by Bjärton in 1975

I guess people might have noticed that I’m quite obsessed with Levin guitars, but there are actually other Swedish guitar brands that I care about too, like Hagström Crafton, Bjärton and Lugnås. I recently found my first steel string Bjärton, I have had a nylon string since my mid teens but never actually played on a steel string Bjärton until now. This is an awesome looking Hagström B-60 or Bjärton B-60 as it was called in Sweden, it’s the same guitar but since Hagström was more famous abroad they used that name for the export models. They were built by Bjärton in Bjärnum in the south of Sweden. It’s a pretty great guitar, loosely modelled on a Gibson J-50, Bjärton made a legendary Gibson J-45 copy in the Sixties called Hagström H-45 or Bjärton J-45 which was used by David Bowie and a lot of others. That model came with or without factory installed pickup and they even made a 12-string version. This Hagström B-60 is slightly more modest and looks pretty basic. It’s a nice sounding guitar, even though it has a bolt-on neck which should kill the tone completely, I guess the solid woods and massive neck block is helping with the sound.

Hagström B-60 Made in Sweden 1975Hagström B-60 Made in Sweden 1975

Hagström B-60 / Bjärton B-60
Body width: 410 mm, body length: 510 mm, body depth: 120 mm
Spruce top with X-bracing, mahogany back and sides
Mahogany bolt-on neck, unbound rosewood fingerboard
Single-bound top and back, rosewood pin bridge
Van Gent machine heads, natural finish and 10 year warranty
Introduced: ca 1972, available for export under the Hagström brand

Hagström B-60 Made in Sweden 1975The guitar was in pretty good shape when it arrived. I did the normal cleaning, polished frets and oiled the fretboard and then installed a bone saddle and ebony bridge pins to improve the sound

Van Gent tuners, Hagström B-60 Made in Sweden 1975My main challenge was to try to get the Van Gent machine heads clean. The guitar smells like it has spent the past 40 years in the company of an old pipe smoker so I assume that’s actually tar and nicotine that has built up over the years. I’m an old ex-smoker myself so to me it smells like pure heaven.

Rondo

Rondo by Levin Made in Sweden 1960Rondo, built by Levin in Gothenburg Sweden in 1960

Today is wife’s birthday so tried to be a good husband and got here an old guitar. I found her a little Rondo, a mail order guitar built by Levin in the late 1950’s. I have actually never seen one of these before so I was quite exited when it arrived. It surely feels, plays, smells and sounds like a Levin. Rondo was made by Levin for Musik AB Westin & Co, a music store and publishing company in Stockholm with a large mail order business. It looks pretty similar to a Levin 119 and was made for both steel and nylon strings, this was pretty common on smaller Levin guitars in the 1950-60’s. It’s a very nice little guitar to play and it has more volume and sounds sweeter than I expected, perhaps because it’s fan braced instead of ladder braced. My wife seemed very happy with it too when she got it this morning.

Rondo by Levin Made in Sweden 1960Rondo by Levin Made in Sweden 1960

Rondo
Non-cutaway. Body width: 320 mm, body length: 455 mm
Body depth: 95 mm, scale length: 595 mm
Spruce top, maple back and sides, fan braced
Single-bound top, unbound back, unbound headstock
Unbound rosewood fingerboard with pearl dot inlay
Mahogany neck with non-adjustable T-shaped duraluminum truss rod, rosewood bridge, stainless tuners
Natural finish, one year warranty

Rondo by Levin Made in Sweden 1960It was in pretty good shape when it arrived. I had to glue a couple of small cracks, polish the frets, oil fretboard and machine heads and give her a good clean but that was it. The only problem was that this had to be done when my wife wasn’t around so I’ve been a guitar repairing ninja for the last week.

Rondo guitar, Musik AB Westin & Co 1957 catalogueThe Levin built Rondo guitar in a 1957 catalogue from Musik AB Westin & Co

Hagström HIII

Hagström III Made in Sweden 1970The 1970 Hagström HIII is now sold and is going to be sent off to Jose in A Coruña.

Levin Model 46

Levin Model 46, 8-string mandolin, Made in Sweden 1949Levin Model 46 Classic, 8-string mandolin, made in Sweden by Levin in 1949

A couple of weeks ago I found a little Levin Model 46 Classic, 8-string mandolin. This is one of the less fancy ones that Levin made in the 1940’s but it’s still a great little mandolin. Someone has unfortunately changed the machine heads on one side during it’s life but the rest is original. I had a cheap Thomann mandolin before and this is a world of difference, I wonder how good Levin’s top of the line mandolins sound if a simple one like this could be so strong and powerful.

Levin Model 46 Classic
8-string Mandolin, flat back
Body width: 225 mm
Spruce top with birch back & sides
Single-bound top and back, unbound headstock
Unbound walnut fingerboard with pearloid dot inlay
Nickel plated tuners, sunburst finish, one year warranty

Levin Model 46, 8-string mandolin, Made in Sweden 19491949 Levin Model 46, 8-string mandolin, Made in SwedenNow I just have to learn how to play mandolin properly

Hagström HIII

Hagström III Made in Sweden 1970Hagström HIII, Made in Sweden 1970

I found a Hagström HIII back in April that I felt really sorry for and had to rescue, or rather save it from being slaughtered and sold for parts by someone else. Unfortunately it wasn’t a bargain and I probably wouldn’t have bought it if I wasn’t drunk at time, I need to stop browsing eBay on Sunday evenings. It had all the parts but the fretboard and frets were in a terrible state and the electronics weren’t working properly, basically a nice guitar and worth the price if it was working. All the hardware cleaned up nicely, I love the Van Gent machine heads, a complete set tend to go for 100€ on their own, and it had the original tremolo, pickups and pickguard. I had to remove the old frets, even out the fretboard and then refret it to get it playable. After waiting for over a month I finally got the switch needed from Hong Kong here we are, a fully restored and working 1970 Hagström HIII. Even though I love the look and sound of this guitar I can’t seem to get used to the fast Hagström neck, the fastest neck in the world, and therefore it’s for sale.

Hagström III Made in Sweden 1970Hagström III Made in Sweden 1970Hagström HIII made in Älvdalen, Sweden between 1970-1972. It’s the 491st HIII made in a series of totally 708 guitars, this was the last run ever of this model since it was replaced by the more 1970’s looking Hagström HIIN

Hagström III Made in Sweden 1970I started with taking the guitar apart and cleaning everything with a toothbrush and some soap and then polish up all the hardware.

Hagström III Made in Sweden 1970The electronics was in fairly good state but needed to be grounded properly. Also the on/off wasn’t plugged in and the bridge pickup’s switch wasn’t working properly so I had to wait a month for a new one from Hong Kong. Now everything is soldered up properly and is working fine.

Hagström III Made in Sweden 1970The back of the neck was a mess, dents and groves everywhere so I filled them with Nitro and sanded everything smooth before I buffed it up with metal polish so now you can’t feel it.

Hagström III Made in Sweden 1970The main problem with the fretboard was the deep groves in it, it almost looked like the first 5-7 frets had been scalloped. The original frets were really uneven too so I decided to refret it completely. I pulled out the old frets, sanded the fretboard even and then gave it 10″ radius before I re-cut the fret slots and installed new Jescar jumbos.

Hagström III Made in Sweden 1970I levelled, crowned and polished the frets and in the end the fretboard looked pretty damn good if I may say so myself.

Hagström HIII and Hagström HII Made in Sweden 1970Hagström HIII and my friend Rafa’s Hagström HIIN, both Made in Sweden in 1970, same body but different pickups, electronics and head shape

This video was shot before I changed the bridge pickup’s switch so it’s cutting out occasionally, that has been sorted now with a new switch. I posted these two videos so you can here the difference between Hagström’s fat single coils and their humbuckers.

Here is a new video of the Hagström III with all the switches working, unfortunately my amp is acting up and is making hell of a noise