Claescaster

Tag: guitars for sale

Martin SPD-16R

Martin SPD-16R Made in USA1999Martin SPD-16R, Made in USA 1999

I have this beautiful 1999 Martin SPD-16R for sale. I really like it but the likelihood of me playing on anything that isn’t a Swedish Levin is so slim that it’s not worth keeping such a great guitar. I haven’t opened the case to my beloved Sigma DR-41 for ages either, it’s so hard to put the Levin guitars down. These late 1990’s Martin SPD-16R has quite a following and is getting harder to find so if you are interested send me an email. Update: This guitar is sold now

Advertisements

Guitars for sale

I’ve decided to thin out my electric guitar collection as well so if you see anything you like, just get in touch claesgellerbrink@gmail.com

Fender Stratocaster Made in USA 1979, 3 tone Sunburst, hardtailFender Stratocaster, Made in USA, Fullerton plant 1979, 1650€ SOLD
A late 1970’s hardtail Fender Stratocaster in a classic 3-tone sunburst. The neck is stamped with 1978 but body, pickguard and pickups says 1979, very common on late 1970’s Fender. All hardware is original but the volume pot and 5-way switch has been changed and the middle pickup is a bit of a mystery, neck and bridge are original Fender and stamped 1979. It’s in really good state for its age with just a few marks to the body, the grain is amazing and it looks like it’s a one piece ash body. The back of the neck is in great shape just like the original jumbo frets and fretboard. It sounds and feels awesome. You can read more about the guitar here and here and watch this Youtube clip.

Greco Spacey Sounds TL-500Greco Spacey Sounds TL-500, Made in Japan 1979, 800€ SOLD
This is as close to a vintage Japan made Fender Telecaster you can get, built in the same FujiGen factory just before Fender gave the contract to build the first JV, Japan Vintage, series there. Greco is well known for their build quality and the sound of their Maxon pickups. This is an all original Greco TL-500, built in August 1979. The neck and frets are in great shape but there are some chips and marks around the body. You can read more about the guitar here.

Tokai Silver Star SS-36 Made in Japan 1979Tokai Silver Star SS-36, Made in Japan 1979, 750€ SOLD
This is a beautiful looking Tokai Silver Star with great grain showing through the 3-tone sunburst. It’s all original and in really good state for its age with hardly any marks. Tokai together with Greco was without any doubt the best Japanese copies in the 1970-80’s and the reason why Fender started to produce guitars in Japan, first through FujiGen and later the Tōkai Gakki factory. It has great sustain and together with the legendary grey bobbin pickups it sounds amazing. You can read more about the guitar here and listen to it in this Youtube clip.

Tacoma Stratocaster Made in Japan 1970'sTacoma Stratocaster, Made in Japan 1970’s, 400€ SOLD
This great looking Tacoma Stratocaster was made in Japan in the late 1970’s, most likely by FujiGen since it’s so similar to a Yamaha Super r’n Roller. It’s all original and in really good state for its age with hardly any marks. Neck, fretboard and frets are fine, it has great sustain and the pickups sounds great. You can read more about the guitar here and listen to it in this Youtube clip.

Greco Les Paul Custom EG-600CGreco Les Paul Custom EG-600C, Made in Japan 1980, 750€ SOLD
This is as a great looking FujiGen built Greco Les Paul Custom copy with gold hardware. It’s all original and in great shape for it’s age. Greco is well known for their build quality and the sound of their Maxon pickups. The neck, fretboard and frets are in great shape and there is hardly any marks to the body.  These Greco’s are of course set neck Les Paul copies and of way better quality then all the bolt-on neck guitars built by Matsumoku and other factories. You can read more about the guitar here.

CG Winner AO-410 Made in Japan Neck trough late 1970'sC.G. Winner AO-410, Made in Japan, early 1980’s, 350€ SOLD
A great sounding C.G. Winner AO-410, a well built double cutaway neck trough guitar made in Japan. The brand was created by Clarence Griffith Winner (C.G.Winner), an American luthier and close friend of Leo Fender and built by Matsumoku in Japan, the same factory as Ibanez and Aria Pro II. These guitars are supposed to have Di Marzio humbuckers but I can’t see any markings on them so there might be normal Maxon pickups in this one. It has an awesome baseball bat neck, really fat and nice and plays really well. The hardware is a bit tarnished but it’s in overall really good shape for the age, the neck is straight and frets are fine. You can read more about the guitar here and watch this Youtube clip.

Guitars for sale

Martin SPD-16R Made in USA1999Martin SPD-16R, Made in USA 1999, 1500€ 1300€
Martin SPD-16R is a Special Edition Dreadnought from Martin guitars. Spruce top and Indian Rosewood back and sides with forward shifted scalloped X bracing. Performance taper, low oval mahogany neck with rosewood fretboard and bridge. Snowflake inlays, abalone rosette and a D-45 style back strip with gold Martin stamped machine heads. Produced in USA between 1996-2001. The guitar is in fantastic shape for being 18 years old with hardly any scratches and no fretware. The top has a hairline crack from the bridge down which has cracked the lacquer but not the wood. SPD-16R stands for Special edition, Dreadnought, 16-series in Rosewood. This guitar looks great and sounds amazing, you can read more about it here and listen to it in this Youtube clip.

Gibson J-45 ADJ 1965 Made in USAGibson J-45 adj, Made in USA 1965, 2300€ SOLD
An awesome looking Gibson J-45 ADJ, built in the Kalamazoo factory in 1965. It’s the classic round shouldered Gibson dreadnought, natural finish spruce top, mahogany back and sides, rosewood fretboard and bridge. All original except for the refinish which turned this J-45 in to a J-50. Apparently this was done in the early 1970’s when the slight separation in the tops mid seam was glued. The guitar looks really great, worn but still well preserved for being 50  years old. The sound is just amazing, it has that typical Gibson bass response that you can hear on the early records of James Taylor and Jackson Browne. I cut a new bone saddle for it but it comes with it’s original adjustable rosewood bridge. It has an endpin jack already installed so it’s ready to play live, just ad a pickup. A brand new flight case is included to protect the guitar. The action is low and there are no structural issues with this guitar, just the normal marks and scratches. You can read more about the guitar here and listen to it in this Youtube clip.

Gibson B-15 Made in USA 1969Gibson B-15, Made in USA 1969, 1200€ SOLD
This 1969 Gibson B-15 sounds and plays great and is pretty good shape for it’s age. There is a lot of scratches and wear to the top and sides but the are no cracks or structural issues. It’s all original and even comes with the Gibson made alligator chipboard case. The action is good and the frets has very little wear. The B-15 was an all solid model with a natural finished mahogany body, a mahogany stained spruce top and rosewood fretboard and bridge. Gibson referred to the B-series as student models at the time which is a bit misguiding considering what a student guitar sounds like today. These have great even tone and pretty amazing sustain for the size, a perfect little blues machine. You can read more about the guitar here and listen to it in this Youtube clip.

Harmony Monterey, Made in USA 1950's 784H1325Harmony Monterey H1325, Made in USA 1950’s, 550€ SOLD
Very cool looking US made archtop from the late 1950’s. Solid spruce top with birch back and sides, 16 1/2 in wide grand auditorium size, steel reinforced neck. This guitar is all original and even comes with the original case. There is a glued crack on the side but no other issues. It sounds great, loud and clear acoustically. You can read more about the guitar here and listen to it in this Youtube clip.

K. Yairi YW-1000 Made in Japan 1973K. Yairi YW-1000, Made in Japan 1973, 1700€ SOLD
This is the top of the line, the fanciest guitar that K. Yairi built. Their Martin D-45 copies are legendary for their sound and build quality. This guitar has real Brazilian Rosewood back and sides and a beautifully aged solid spruce top. Real abalone inlays all around and the typical Martin volute where the head and neck meet. At the moment this guitar has Wilkinson WJ28NGD open gear machine heads in gold fitted but I still have the original K. Yairi machine heads. It’s all original except for the bridge which is a brand new hand cut and shaped replacement in ebony with a bone saddle and ebony bridge pins. The guitar is in great shape for being 43 years old but there are a couple of scratches to the top, one big one close to the bottom. The neck is straight, trussrod works and the action is low. The guitar sounds amazing, so deep and clear at the same time. These K. Yairi YW-1000 are extremely rare in Europe and without any doubt the closest you can get to a real 1970’s Martin D-45. You can read more about the guitar here and listen to it in this Youtube clip.

Morris W-50 1970's Made in JapanMorris W-50, Made in Japan 1970’s, 700€ SOLD
Nice Martin D-42 copy with real abalone hexagon inlays and the typical Martin volute where the head and neck meet. Solid spruce top with nice inlays all around and a beautiful 3-piece back with flamed maple and dark rosewood. The guitar is all original and in really good shape for being over 35 years old but with some scratches, one slightly larger on the top. The neck is straight, trussrod works and the action is low. The guitar sounds great, very clear and Martin like. You can read more about the guitar here and listen to it in this Youtube clip.

Morris W-50 1970's Made in JapanMorris W-50, Made in Japan 1970’s,650€ SOLD
Great looking Martin D-42 copy with snowflake inlays and the typical Martin volute where the head and neck meet. Solid spruce top with nice inlays all around and a beautiful 3-piece back with flamed maple and dark rosewood. The guitar is all original and in really good shape for being over 35 years old but with scratches and marks around the body. It has Wilkinson WJ28NGD open gear machine heads in gold installed now but the original will be included. The neck is straight, trussrod works and the action is low. The guitar sounds great, very clear and Martin like. You can read more about the guitar here and listen to it in this Youtube clip.

Morris W-40 1973Morris W-40, Made in Japan by Terada 1973, 500€ SOLD
A pretty early Morris and a very nice looking Martin D-45 copy, made by Terada in Japan, the factory that makes Gretsch and Orville. Solid spruce top with a really nice 3-piece back of Brazilian rosewood and maple. The inlays are real abalone hexagon inlays and I still have the original machine heads if chrome is preferred to gold. It has it’s fair share of scratches and has been played a lot over the past 42 years but it has no cracks or issues. The neck is straight, trussrod works and the action is low. The sound is just amazing, really deep bass but with good clarity and great projection. It has a endpin jack fitted and a strap button so it’s ready to be gigged with straight away, just fit a pickup. It’s still one of my favourites but now I have too many Morris guitars and have to get rid of some. You can read more about the guitar here and listen to it in this Youtube clip.

Morris WL-35 Made in Japan 1970'sMorris WL-35, Made in Japan 1970’s, 400€ SOLD
A really cool looking Johnny Cash Guild copy. It’s in great condition except for one flaw, the end pin has been pushed in at one point and cracked the lacquer. It’s not as bad as it sounds and it doesn’t really affect anything but I thought it would be worth mentioning. I’m pretty sure it’s mahogany back and sides, it has a really warm and nice sound and is a great playing guitar. It has a endpin jack fitted and a strap button so it’s ready to be gigged with straight away, just fit a pickup. You can read more about the guitar here and listen to it in this Youtube clip.

K.Yairi TG-40 Made in Japan 1977K. Yairi TG-40, Made in Japan 1977, 700€ SOLD
A very rare and unique K. Yairi copy of the famous Guild D-40, which itself was introduced in the Sixties as a competitor to Gibson’s J-45. The Guild D-40 became famous as the Bluegrass guitar for their even response over all the strings and I have to say that this K. Yairi TG-40 sounds amazing. Solid spruce top, sides and back in solid mahogany, neck in Honduras mahogany, bridge and Fretboard in black ebony. The guitar is all original except for the pickguard, which was replaced with an official Guild pickguard, the old one was cracked. It has an end pin jack and strap button fitted and at the moment Wilkinson WJ-309 Art Deco machine heads in gold but I still have the original machine heads if chrome is preferred to gold. The top and back has a few scratches but no structural issues. It plays really well and has an amazing tone, very loud and clear with a great punch in the mid-range. You can read more about the guitar here and listen to it in this Youtube clip.

K. Yairi YW-130 Made in Japan 1977K. Yairi YW-130, Made in Japan 1977, 550€ SOLD
This is a quite accurate Martin D-28 copy made in Japan by K. Yairi in 1977. It’s really light and beautiful sounding, very responsive and a joy to play. Solid spruce top, rosewood back and sides with a smooth ebony fretboard. It has it’s fair share of scratches and a couple of dents to the top but no cracks or issues. The neck is straight, trussrod works and the action is low. The sound is great, very clear with great harmonics. It has a strap button fitted and at the moment Wilkinson open back machine heads in gold but I still have the original machine heads if chrome is preferred to gold. You can read more about the guitar here and listen to it in this Youtube clip.

IMG_9283Levin Model 13 Ambassadör, Made in Sweden 1950, 600€ SOLD
This is a beautiful Levin Model 13 Ambassadör, hand built in Gothenburg Sweden in 1950. If you are not familiar with this classic Swedish brand Levin, click on the link to read more about it. It was restored a few years ago by GammelGura, a great luthier in Örnsköldsvik, Sweden. With new bronze frets, a neck re-set, cracks glued and a new bridge was created to improve the intonation, the rest is all original. It even has the sticker on the back of the head from the guitar shop in Örnsköldsvik where the guitar was bought 65 years ago. It’s a fairly small ladder braced 12-fret guitar with a big sound because of the body width, 400 mm. All solid woods, as always with Levin. Spruce top, walnut back and sides, 4-ply bound top, single-bound back. Mahogany neck with non-adjustable T-shaped duraluminum truss rod. Single-bound rosewood fingerboard with 18 frets and pearloid dot inlay. Single-bound headstock, rosewood bridge, nickel plated individual tuners. Sunburst finish, very similar to the Gibson sunburst of the 1940-50’s, and 10 years warranty. You can read more about the guitar here and listen to it in this Youtube clip.

Levin Model 65 parlour guitar Made in Sweden 1942Levin Model 65, Made in Sweden in 1942, 550€ SOLD
A nice little parlour guitar from Levin, made during World War II in Gothenburg Sweden. It’s just 315 mm wide so it’s a perfect little ladder braced blues machine. All solid woods, spruce top, birch back and sides with walnut fretboard, brass machine heads and nickel plated tailpiece. The guitar is all original, I carved a new bridge for lowering the action but the original will be included in the sale. The neck is really fat and nice and feels great to play. A perfect parlour for blues picking. You can read more about the guitar here and listen to it in this Youtube clip.

Hagström Western 6 Made in Sweden 1978Hagström Western 6, Made in Sweden in 1978, 650€ SOLD
A very rare Hagström Western 6 Missouri made in 1978 by Bjärton in Bjärnum in the south of Sweden. Bjärton were the second largest guitar manufacturers in Sweden after Levin, and they produced all the acoustic instruments for Hagström. It’s both stunning to look at, a joy to play and it sounds great. It has the same head, fretboard and inlays as the legendary Hagström Suede electric guitars had in the 1970’s. Spruce top with X-bracing, mahogany back and sides. 4-ply bound top and bound back. Unbound ebony fingerboard, rosewood bridge, mahogany neck. Matte natural finish and 10 year warranty, which was only give to the top end models. You can read more about the guitar here and listen to it in this Youtube clip.

Hagström B-60 Made in Sweden 1975Hagström B-60, Made in Sweden by Bjärton in 1975, 500€ SOLD
This great looking Gibson J-50 copy was made in 1975 by Bjärton in Bjärnum in the south of Sweden. Bjärton were the second largest guitar manufacturers in Sweden after Levin, and they produced all the acoustic instruments for Hagström. It’s made out of all solid woods and it’s a very nice sounding guitar, even though it has a bolt-on neck, I guess the solid woods and massive neck block is helping with the sound. Spruce top with X-bracing, mahogany back and sides with a nice mahogany bolt-on neck, unbound rosewood fingerboard, Single-bound top and back, rosewood pin bridge. Van Gent machine heads, just like Levin, natural finish and 10 year warranty, which was only give to the top end models. You can read more about the guitar here and listen to it in this Youtube clip.

Rubenca, Zaragoza

Rubenca Spanish Guitar Zaragoza 1960'sRubenca Spanish Guitar made in Zaragoza in the 1960’s

My guitar playing days started with electric guitars and I never really cared much for acoustics until I moved to Spain in 2010 and now acoustic guitars are my main passion in life. Another thing I never used to pay much attention to was Spanish guitars but after moving here I have occasionally come across some that I really liked, especially my Francisca Montserrat but also the Juan Estruch I got for my friend Rafa. This is one of them, a Rubenca Spanish guitar made in Zaragoza most likely in the 1960’s. The only info I found about the brand is that Rubenca is music store in Zaragoza that is still in business so I assume these guitars were made somewhere in the area and sold as their own brand, unless they made guitars themselves back then. Like most Spanish guitars from the 1960-70’s it has some parts that is way above what you expect, like all solid woods, how well they sound and especially the fancy mother of pearl inlays around the soundhole on this Rubenca. At the same time I’m always surprised how cheaply looking the fretboards tend to be, why they never bothered to smooth out the frets, why the braces seems to be cut with a freaking axe or why the machine heads never work after 50 years. I found this Rubenca when I was down in the south a couple of weeks ago to see my wife’s family. I bought it for the fancy inlays, I’ve never seen anything like that on a Spanish guitar before, but was straight away taken by the the sound and quality of the guitar. The original machine heads still work, the neck is straight and the action is still ok for a guitar that lacks trussrod. I actually didn’t have to do much more than to give it a good clean when I got it. This guitar is for sale, even though I like it a lot, but I can’t justify having more than one Spanish guitar since I hardly play them.

Rubenca Spanish Guitar Zaragoza 1960'sRubenca Spanish Guitar Zaragoza 1960'sThe Rubenca has it’s wear and tear, like a glued crack in the side, but still, the beautiful inlays and the patina makes it’s all worth it

 

 

 

Guitarras de artesanía, Artículos J.A.R.

Guitarras de artesanía, Artículos J.A.R. Mataró 1970'sGuitarras de artesanía, Artículos J.A.R. Spanish guitar made in Mataró outside Barcelona 1970’s

I found this guitar in a Cash converters last week and felt so sorry for it. It had a broken head, a cracked brace, loose back and looked so sad that I felt I had to save it and bring it back to life. A week later she is up and running and sounds pretty damn sweet.

Guitarras de artesanía, Artículos J.A.R. Mataró 1970's

I couldn’t find any info about the brand so if anyone knows anything more about it then please get in touch. It has a solid spruce top and what looks to me like solid maple back and sides. It says “Guitarras de artesanía” which should indicate hand crafted but I’m not sure, quality wise it feels pretty much like the Juan Estruch I got for my friend Rafa’s birthday. Perhaps all Spanish guitars were more or less hand crafted back then, the big business guitar factories hadn’t really kicked in yet. I have put this guitar up for sale since I mainly play steel string acoustic guitars and on top of that I have a Francisca Montserrat that I really like.

Guitarras de artesanía, Artículos J.A.R. Mataró 1970'sFirst I had to try to clean her up, I have never seen a top with that much grease and grime. I used a normal furniture spray and a toothbrush, it worked like a charm. When I had cleaned the fretboard I polished the frets and oiled up the fretboard with lemon oil. She came out looking pretty descent after that.

Guitarras de artesanía, Artículos J.A.R. Mataró 1970'sNow I just had to take care of the broken head and glue the back. I have actually never glued a head on before but I assumed that you do something like this. I used to thin pieces of wood on each side to stabilise it and keep things in place, and also for not damaging the head any further with the force of the clamps. I guess it could have worked with normal wood glue too but I used my trusty old fish glue that I use for pretty much everything when it comes to guitars. It came out looking very solid after being clamped for 48 hours. I also glued the open back and a cracked brace, which was pretty straight forward. The machine heads was broken on one side so I replaced them with the leftovers from the Juan Estruch I fixed last year. They don’t match exactly but at least they are from the same time and region, that’s close enough for me. Compared to the state I found her in I think she is looking pretty good. More images can be found here.

Guitars for sale

Maya F335G Made in Japan 1970sMaya F335G, Dreadnought acoustic, Made in Japan, 1970’s, 200€ SOLD
Japan made Gibson J-50 copy in a pretty good state for it’s age. I couple of marks on the spruce top and few knocks on the head but structurally very sound without any cracks. This Maya F334G was made by Chushin Gakki in Kobe, Japan, during the 1970’s. It has a really fat neck, it’s feels great to play, adjustable bridge with both bone nut and saddle. The sound is very full with a great booming bass. If you want more pictures  you can check the post I wrote about it.

There are a couple of more guitars for sale here

Suzuki Three-S F-120

Suzuki Three-S F-120 Made in Japan #780721
A really well kept Suzuki Three-S F-120. Built in 1978 by Suzuki Violin Co. LTD in Nagoya Japan.

I recently found another Suzuki Three-S F-120. These are great little Japanese built guitars that I can highly recommend. Really sweet tone and pretty descent build quality for being so inexpensive. Of course they can’t compare to Morris or K. Yairi but next to Aria, Maya, Shiro or the normally Suzuki’s they are great. It’s a simple Martin D-18 copy built in 1978 by Suzuki Violin Co. LTD in Nagoya Japan. What always surprises me with these Suzuki Three-S F-120 is how light they are compared to a lot of Japanese dreadnoughts from the 1970’s that can feel pretty heavy and bulky. Unfortunately this one was sold straight away so I only got time to fix it up and make a Youtube video of it before it was gone. If you want to know more about different Japanese guitar brands then check my previous post.

Suzuki Three-S F-120 Made in Japan #780721
Suzuki Three-S F-120 Made in Japan #780721

Suzuki Three-S catalogue USA 1979
Suzuki Three-S F-120 in an old Japanese catalogue from 1979. It has spruce top, might actually be solid, with a laminated nato back and sides. Nato neck with a really dark rosewood fingerboard and bridge, it almost looks like ebony.

Levin Model 13 Ambassadör

Levin Model 13 Ambassadör Made in Sweden 1950
Levin Model 13 Ambassadör Made in Sweden 1950

I have decided to thin out my Levin collection a bit, I have 12 at the moment, so the first to go will be my beloved 1950 Levin Model 13 Ambassadör. It was restored a few years ago by GammelGura, a great luthier in Örnsköldsvik, Sweden. With new bronze frets, a neck re-set, cracks glued and a new bridge was created to improve the intonation, the rest is all original. It even has the sticker on the back of the head from the guitar shop in Örnsköldsvik where the guitar was bought 65 years ago. If you are interested in the guitar send me an email or give me a call, all info can be found on the For sale page.

Levin Model 13 Ambassadör Made in Sweden 1950

Levin Model 13 Ambassadör
Body width: 400 mm, body length: 480 mm, scale length: 640 mm
Spruce top, walnut back and sides, 4-ply bound top, single-bound back
Mahogany neck with non-adjustable T-shaped duraluminum truss rod
Single-bound rosewood fingerboard with 18 frets and pearloid dot inlay
Single-bound headstock, rosewood bridge, nickel plated individual tuners
Sunburst finish and 10 years warranty

Fender Telecaster Japan TL52-75

Fender Telecaster TL52-75, ’52 re-issue, Made in Japan
Fender Telecaster TL52-75, ’52 re-issue, Made in Japan by FujiGen between 1987-1989

In loving memory of Nancy, my Fender Telecaster TL52-75, that was sold last night. I miss her already but I’m glad she went to a good home. She lives in Zaragoza now with Juan and I’m sure she will get more love than I could ever give her. Two guitars have left me in the same week, I think I’m still in shock, sad but kind of happy at the same time.

Fender Japan TL52-75

 

Guitars for sale

I have a couple of more guitars for sale now so if you’re interested or have any questions just send me an email claesgellerbrink@gmail.com or give me a call 639586158.

Hohner Telecaster Made in Japan 1970s Hohner Telecaster, Made in Japan, Moridaira factory, 1970’s, 500€ SOLD
A great Telecaster copy in a good shape for age but with some dings to the bottom of the body. Frets are in great condition and there isn’t a single mark on the back of the neck. It’s a pretty heavy Telecaster with great sustain and nice feel to it. The pickups sounds awesome and everything is working fine, all original except for the 3-way switch that wasn’t working properly so I replaced it with a new one. Really fast and smooth neck, lovely to play. A great sounding guitar with amazing sustain and great Japanese build quality. Made in Japan by Morris in the Moridaira factory, where H.S. Anderson made the Mad Cats that Prince uses. You can read more about the guitar here and here is a Youtube clip.

VOX Les Paul Made in Japan 1970sVOX Les Paul, Made in Japan, 1970’s, 350€ SOLD
This is the first Japan made VOX guitar I’ve found in Spain. It’s a pretty decent copy of a 1958′ Les Paul with a great feeling fat neck and narrow head. The body has a lovely grain and the guitar is in pretty good shape for the age with a couple scratches and a few dents. Frets show some wear but are still fine and everything is working perfectly. The humbuckers have a nice tone too them, not too heavy or muffled. A pretty versatile and nice guitar to play with great Japanese build quality. You can read more about the guitar here and here is a Youtube clip.

Maya F335G Made in Japan 1970sMaya F335G, Dreadnought acoustic, Made in Japan, 1970’s, 250€ SOLD
Japan made Gibson J-50 copy in a pretty good state for it’s age. I couple of marks on the spruce top and few knocks on the head but structurally very sound without any cracks. This Maya F334G was made by Chushin Gakki in Kobe, Japan, during the 1970’s. It has a really fat neck, it’s feels great to play, adjustable bridge with both bone nut and saddle. The sound is very full with a great booming bass, you can listen to it here. If you want more pictures  you can check the post I wrote about it.

Fender Telecaster Japan TL52-75Fender Telecaster TL52-75, ’52 re-issue Made in Japan, FujiGen 1987-1989. 900€ SOLD
In mint condition, all original, without any doubts the best Telecaster I have ever played. Imported straight from Japan. The only reason for selling is because I prefer fat 70’s necks. There is no way to find the production year of these A-serial Telecaster with the serial number on the bridge plate. However, it must have been made between 1987 and 1989 since it’s a TL52-75. They were called TL52-70 between 1984-1986 and then changed to TL52-700 in 1990. You can read more about the guitar here and listen to it in this Youtube clip.

Westone Stratocaster Made in Japan MatsumokuWestone Stratocaster, Made in Japan, Matsumoku factory, 1979, 400€ SOLD
An amazing Stratocaster copy from 1979 made in Japan by Matsumoku. In really good shape for age but with some dings and scratches to the body. Frets are in great condition and there isn’t a single mark on the back of the neck. The wood in the body is amazing, without any doubt the heaviest and most solid Strat I have ever seen with fantastic sustain. Really nice tone in the pickups and everything is working fine, the original 3-way switch has been replaced with an Oak Grigsby 5-way switch. Really fast and smooth neck, lovely to play. A great sounding guitar with amazing sustain and great Japanese build quality. Here is some more info about the Westone brand. Here is a Youtube clip with the guitar.