Claescaster

Category: Claes Collection

Morris W-40

Morris W-40 1973
Morris W-40 1973

My new found love just arrived to the office, a 1973 Morris W-40. I have been looking for a Japan made Martin D-45 copy for a while and I’m really glad I went for a Morris. I have never played a guitar that sounds this good, amazing tone with really low action. She is a bit more worn than I expected, which doesn’t really bother me that much since the wood looks so good. I might put some gold tulip machine heads on her tonight, if my Gibson PMMH-025 fits. This Monday is just getting better and better. First I got to celebrate my girlfriends birthday, which meant getting up at 5.45 am and prepare breakfast in bed for her, and then I got this baby delivered and she arrived in one piece. Thank you Monday.

Japanese guitar brands

Greco Spacey Sounds TE-500N, Greco Les Paul Custom EG-600C, Greco Spacey Sounds TL-500
The Greco family, Greco Spacey Sounds TE-500N 1977, Greco Les Paul Custom EG-600C 1980, Greco Spacey Sounds TL-500 1979

I guess it will come as no surprise that I love Japanese guitars, especially Greco’s. I have over the years learned quite a lot about different brands and makers but it can get pretty confusing for me too. Luckily I found this great list of Japanese guitars brands, or rather a list of guitar makers. The list might not be complete but it’s a good start. Taken from Who Made My MIJ Guitar

Atlansia
This guitar manufacturer started out as a parts supplier in the early 1970’s. Atlansia didn’t begin production of guitars under their badge until infamous engineer and designer Nobuaki Hayashi of Matsumoku fame became the company’s president and chief designer in the late 1970’s. Since then, Atlansia has continued to produce cutting-edge guitar designs in Nagano, Japan. The company did not make any other badged guitars other than namesake Atlansia.

Chushin Gakki
Chushin is still in operation today in Nagano, Japan and does business with guitar giant Fender. I believe that Chushin may have been a member of the Matsumoto Musical Instruments Association listed further down because both companies produced Fresher guitars during different periods….with Matsumoto beginning production and Chushin ending it (perhaps because the Association was disbanded?). During the 1960-1980 period they were responsible for badges Bambu, Cobran, El Maya and Hisonus as well as some Charvel, Fresher and Jackson badges. The company may have possibly made some guitars with the Aztec, Maya and Robin badges, but that is not verified. Guitars made by Chushin from this period are well-made and appreciated by guitar enthusiasts worldwide.

Daimaru
Founded in the city of Matsumoto, Japan in the early 1960’s, Daimaru produced their own house brand, although they outsourced electric guitar production to Teisco during the 1970’s period. Daimaru appears to have gone out of business after 1980.

Dyna Gakki
Dyna Gakki began production in 1972 in the city of Nagano, Japan. They manufactured guitars for Fender Japan and Greco, so they couldn’t have been a terrible manufacturer as Fender is very choosy about outsourcing their product. Dyna was responsible for the JooDee badge and may have been a source for Japanese manufacturer Yamaki. Dyna also produced the infamous Ibanez badges for a short period of time.

Electric Sound Products (ESP)
Founded in 1975 by Hisatake Shibuya, this wildly-popular manufacturer focused on making quality basses for export as well as electric guitars. ESP survived the ‘copy’ era and is still in business today. Badges made by ESP included their house brand ESP as well as Navigator during the late 1970’s. A possible badge made by the company was Robin.

Elk Gakki (also known as Miyuki)
Makers of the Elk badged guitar from the early to mid 1960’s to 1975, although other sources indicate that the Elk brand did not stop production until the early 1980’s. Elk badged guitars came in clear acrylics in addition to colors in the early 1970’s, which was an attempt to copy clear acrylics designed by the legendary Dan Armstrong in the late 1960’s.

Fernandes
Fernandes Guitars started production in 1969 in Osaka, Japan. It grew and became one of the largest producers of Japanese-made guitars, rivaling competitors Fujigen and Matsumoku. Fernandes produced guitars with the Burny and Nady badges as well as house brand Fernandes. A possible badge made by Fernandes was the oddly named Orange guitar.

Fujigen Gakki
Fujigen Gakki began operation in 1960 as a classical guitar manufacturer, moving into the lucurative electric guitar markets in 1962. The company was the largest producer of Japanese guitars during the 1960-1980 period. They were known for producing high quality products, especially for the badged guitar market, which is why the company was selected by so many major American brands. It wasn’t until 1970 that the company began making products for the venerable Ibanez brand, which was an unqualified success. Fujigen Gakki was the main manufacturer of choice for Greco badged guitars in the 1970 to 1980 period. They also produced guitars for major manufacturer Yamaha. Badged guitars made by Fujigen include Antoria, Epiphone, Jason and Mann. Badged guitars that may have been made by Fujigen Gakki were Marlin and St. Moritz.

Guyatone
Guyatone produced electric guitars for major guitar manufacturer Suzuki. The company also produced their house brand Guyatone. Badged guitars produced by Guyatone include Barclay, Broadway, Coronado, Crestwood, Futurama, Howard, Hi-Lo, Ibanez, Ideal, Imperial, Johnny Guitar, Kent, Kingston, Lafayette, Marco Polo (electrics only), Montclair, Omega, Orpheus, Prestige, Royalist, Saturn, Silhouette, Silvertone, Vernon, Winston and Zenta, an impressive amount of names produced by a single company. Other badges that may have been produced by Guyatone are Beeton (not to be confused by the Beeton Brass Guitar company founded in 1994), Bradford, Canora and Regent.

Hayashi/Zenon
Hayashi was one of the premier acoustic guitar makers among Japanese manufacturers from this time frame. Hayashi bought out small manufacturer Zen-On in 1968 during a period of expansion for the company. Credited with making Pearl badged acoustic guitars, Hayashi was also responsible for making Cortez, Custom and Emperador acoustics.

Hitachi Gakki/Hitachi Musical Instruments Manufacturing
I’m unsure if this company existed or not, but since many major electronics manufacturers jumped into the electric guitar market in the 1970’s, it seems reasonable that Hitachi could have ventured briefly into guitar production. A seller of the badged guitar “Splender” claims it was made by this company. Yet another seller claims the badge Slendon was made by this company.

Hoshino Gakki Ten/ Tama
Hoshino Gakki were known primarily for producing Ibanez guitars during this time although that wasn’t the only badged guitar they made. Badged guitars produced by Hoshino include Cimar, Cimar by Ibanez, Penco, Howard. Tama Industries began guitar production from 1962 to 1967 as a factory of Hoshino, producing more badged Ibanez guitars as well as Continental, Crest, Goldentone, Jamboree, King’s Stone, Maxitone, Star, Starfield (some), Tulio and Jason. Tama eventually took over badged guitar production from STAR Instruments in the mid-1960’s. There’s some evidence that Tama began producing guitars under their own badge from 1975-1979. I’m unsure at this point if this Tama had any relation to the Tama that existed under Hoshino Gakki Ten.

Humming Bird
Little-known manufacturer in operation in the early 1960’s until 1968. Humming Bird made electrics that were copies of Mosrite guitars. It’s possible they also made acoustics.

Iida
Iida began manufacturing guitars in 1958 in Nagoya, Japan. Iida is still producing guitars, but mostly in their factory located in Korea. They were mainly responsible for producing acoustic and semi-acoustic rather than electric guitars for major manufacturers Ibanez and Yamaha. There is speculation that Iida may have assisted Moridara for a short period in making Morris badged guitars, but that is not verified.

Kasuga
Kasuga produced their own house brand in Kasuga guitars. For a brief period of time the company produced Yamaha acoustic guitars. Kasuga guitars were first sold in America in 1972. Unlike many Japanese manufacturers who outsourced their guitar production in other factories outside the main maker, Kasuga produced all their products in-house. Badged guitars known to have been made by Kasuga include Conrad, Emperador, ES-S, Ganson, Heerby, Hondo, Mei Mei and Roland. Kasuga went out of business in 1996.

Kawai Teisco
Kawai Teisco was founded by Atswo Kaneko and Doryu Matsuda. The company also produced the popular Ibanez badge in the 1960’s. Kawai Teisco made their own house brands Kawai, Teisco, Del Rey and Teisco Del Rey. Badged guitars produced by the Kawai Teisco factories include Apollo, Aquarius, Arbiter, Atlas, Audition, Avar, Ayar, Barth, Beltone, Black Jack, Cipher, Concert, Cougar, Crown, Daimaru, Decca, Diasonic, Domino, Duke, Emperador, Heit Deluxe, Hy-Lo, Holiday, Imperial, Inter-Mark Cipher, Jedson, Kay, Kent, Kimberly, Kingsley, Kingston, Keefy, Lindell, Marquis, May Queen, Minister, Noble, Prestige, Randall, Recco, Regina, Rexina, Sakai, Satellite, Schaffer, Sekova, Silvertone, Sorrento, Sterling, Swinger, Tele Star, Top Twenty, Victoria, and Winston. Possible badged guitars made by the company include: Astrotone, Demian, G-Holiday, Lafayette, Master, Orange, Tamaki and Trump.

Kyowa Shokai
This company, which may have been a distributor as opposed to a manufacturer, was a member of the Matsumoto Musical Instrument Association. They have been credited with Camel and Fresher badged guitars, although Freshers were also made by Chushin in the late 1970’s.

Magnavox/Ampeg
Ampeg was swallowed up by Japanese electrical giant Magnavox in 1971, when they wanted to get in on the electric guitar copy craze of the 1970’s. Magnavox produced electric and bass guitars under the Stud badge as well as the successful Ampeg brand. It’s been suggested that Magnavox was also responsible for producing Selmer acoustic guitar badges during this time, but that has not been verified. Selmer was sold to Magnavox around the same time they bought Ampeg, so it certainly seems plausible they could have made Selmer acoustic badged guitars as an offering for that market. Stud badged guitars were made until ’75, with Ampeg guitar production continuing until 1980. Opus was another badge made by the company. Magnavox lost their interest in Ampeg shortly thereafter and the brand languished until it was resurrected over a decade later by another American company.

Maruha Gakki
We know this company existed in the 1970’s in Japan because of stickers found inside repaired Maruha guitars. Maruha made high-quality acoustics, some of which are badged F. Hashimoto (some long lost master luthier?) along with the Maruha badges. These guitars are highly sought-after because of the overall quality.

Matsumoku
Matsumoku is one of the Japanese manufacturers that did not survive long after the heyday of the 1970’s guitar market despite having a long tradition of quality stringed instrument craftsmanship. Matsumoku produced guitars for major manufacturers Greco, Guyatone and Yamaha. Matsumoku made Arai, Aria, Aria Pro II and Aria Diamond badges, with Aria being their primary badge for a majority of this time frame. Badged guitars known to have been made by Matsumoku include Apollo, Arita, Barclay, Burny, Capri, Columbus, Conrad, Cortez (electrics only), Country, Cutler, Dia, Domino, Electra, Epiphone, Granada, Hi Lo, Howard, Ibanez, Lindberg, Lyle, Luxor, Maxitone (this guitar differs from Tama’s Maxitone badge), Mayfair, Memphis, Montclair, Pan, Pearl (electrics only), Raven, Stewart, Tempo, Univox ,Vantage, Ventura, Vision, Volhox, Washburn (in 1979 and 1980), Westbury, Westminster and Westone. Possible Matsumoku badges include: Bruno, Crestwood, Conqueror, Eros, Mako, Memphis, Orlando and Toledo.

Matsumoto Musical Instrument Manufacturers Association
The Matsumoto Musicial Instrument Manufacturers Association was the organization responsible for Fresher guitars. Little is known about this association, other than it did not have larger guitar manufacturers Matsumoku or Fujigen Gakki as members. Nakai Gakki was a possible member of the association. Fresher guitars began production in 1973 by the Kyowa Shokai Company, an association member, which was also responsible for the Camel badge. It’s interesting to note that Fresher guitars were eventually being produced by Chushin, which leads me to believe that they may have been an Association member along with Kyowa. The beginning production year was considered a low quality benchmark for the company. The Fresher brand continuously improved in quality until 1980.

Maya Guitar Company
Located in Kobe, Japan, this manufacturer made the famous Maya brand guitar. Maya guitars were in production from 1970-1980. It’s been suggested that Maya may have been responsible for the Aztec badge. You’ll notice that Maya has been attributed to a company known as Tahara. At this point I do not know if Maya assisted in production or if Tahara produced some Maya guitars as a subcontractor. Maya and El Maya badges have also been attributed to Chushin Gakki. More research is needed to clarify this point.

Moridaira (Morris Guitars)
Founded in 1967 by Toshio “Mori” Moridaira, the Moridaira factory produced high-quality guitars, including the infamous Morris badged guitar. Moridaira also produced badged guitars for Hohner including Coronado, Futurama, H.S. Anderson, Lotus (some) and Sakai.

Nakai Gakki
Little-known manufacturer from Osaka, Japan, this company is responsible for the oddly named John Bennet badge. Nakai has been mentioned as a possible Matusmoto Musical Instruments Association member in the past. The company still exists and is producing musical instruments, quite a feat in light of so many manufacturers who faded after the golden electric guitar age.

Shinko Musical Company
A very small, unknown company that is attributed to being the manufacturer of the Pleasant guitar from 1960 to 1966. Shinko later moved to Korea sometime in the early 1970’s where they produced the Drive guitar badge.

Shiro Musical Instrument Manufacturing Company, Limited
This little-known company is responsible for the St. George badge. This particular badge was made from 1963-1967. It also produced the rare Shiro guitar. It is possible that the company may also be responsible for the Pleasant guitar badge after 1966. This company may have been a small offshoot of Aria Guitar Company, founded by Shiro Arai, but that has not been verified as of today.

STAR Instruments
This company slowly merged into Hoshino/Tama but prior to their unification, produced instruments with the Star badge, mainly drums. They also produced guitars, including the infamous Zim-Gar badged electric and acoustic guitars. Over time, drum production was segmented to Pearl, while guitar contracts were taken up by Tama. Zim-Gar production was relatively short, as these were budget guitars made for K-mart between 1962 and 1968.

Suzuki Musical Instrument Manufacturing
Suzuki had two factories in Kiso and Hamamatsu where they made popular Suzuki guitars. The Hummingbird Suzuki guitar was manufactured in the Kiso factory. Suzuki is also credited with making the Canora and Takeharu badged guitars along with Marco Polo acoustics. Holly is another badge ascribed to Suzuki, although that has not been verified.

Tahara
Founded by a father and son, Ryohei Tahara and the unknown Tahara. I do not know which was the father and which was the son. The company existed until the late 1979 when it was bought up by Saga Musical Instruments. In all, the company existed less than a decade as Tahara. Both the Maya and El Maya badges are attributed to Tahara. Saga Musical Instruments exists to this day.

Takamine
Founded in 1962 in Sakashita, Japan, this manufacturer survived the copy era and is still producing guitars to this day. Takamine was among the first to make and export electric acoustics with their own house brand, although they are primarily known for their acoustic guitars. It is unknown if they made badged guitars.

Terada
Terada was one of the smaller Japanese manufacturers of acoustic guitars during the period of 1960 to 1980, producing products for Epiphone, Fender Japan, Grapham, Gretch and Vesta. Terada produced some Kingston badges until 1975. Other badged guitars produced by Terada include some Burny badges and interesting Thumb guitars. Terada has been in continuous operation since 1912.

Tokai
Tokai was founded in 1947 and is based in Hamamatsu, Japan. Tokai began production of acoustic guitars in 1965 and by 1968 was producing electric guitars for the American market. Tokai still exists as guitar manufacturer. Tokai made guitars for Fernandes, Mosrite and Fender Japan. Tokai badged guitars included the house brand Tokai as well as Cat’s Eyes, Conrad, Drifter, Hondo, Love Rock, Mosrite, Sigma and Silver Star. Possible badges include Artist Ltd., Gaban, Gallan, Gession and Robin. It’s suggested that Tokai made Hummingbird acoustics as well, but if these were related to those made by Humming Bird I haven’t quite sorted out yet.

Tombo
Tombo was the only Japanese manufacturer who produced Norma badged guitars. Tombo made Norma guitars from 1965 to 1970. Badged guitars produced by Tombo include Angelica, Asama, Columbus, Condor, Duke, Horugel, Kinor, Montaya, Queen, Regina, Schaffer and Yamato.

Toyota
Is there anything T. Kurosawa didn’t attempt to manufacture in the 1970’s? Yes, Toyota manufactured a high-end line of acoustic, electric and bass guitars from approximately 1972. Toyota ceased manufacturing guitars in a short span of time (probably because they didn’t sell), although exactly when in the 1970’s production ended, I’m not sure.

Yamaha/Nippon Gakki
Founded in 1946, Yamaha is still going strong in the electric guitar market as a manufacturer. During the timeframe this article covers (1960-1980) all Yamaha guitars were made in Japan, although not necessarily in their factories as they outsourced to other manufacturers.

Yamaki
Yamaki was founded in the 1960 by brothers Yasuyuki and Hirotsygu. Yamaki exists today as a major manufacturer of guitar parts for outside Japanese guitar manufacturers. Yamaki produced a house brand, as well as Daion, Dion, Grande and Jedson badged guitars.

Zen-On (see also Hayashi)
Little known Japanese manufacturer who was out of business by 1968. Zen-On made electric guitars with the house brand Zen-on badge, as well as Beltone, Morales and Zenon badges. Zen-On bought out Hayashi, but exactly when that took place is clouded in mystery.

Thanks again to Who Made My MIJ Guitar for the extensive research. Another great source is the Japanese site Music Trade, where you can read Koyama’s first hand experience with some more obscure brands. I have only tried Fender Japan (MIJ and CIJ), Greco, Tokai, Fernandes, Morris, Suzuki, Westone, Hohner, CSL and Teisco so if you have any questions regarding these brands your are more than welcome to get in touch. I did a previous post about the quality of Japan made guitars that can be found here, Are all Japanese guitars good? Here is the Japanese section of the Claes collection, however some of these guitars have found a new home now.

Japanese guitars, MIJ, Made in Japan
The Japanese collection at the moment: Fender Telecaster TL52-75 1987, Greco Spacey Sounds TE-500N 1977, Greco Spacey Sounds TL-500 1979, Greco Les Paul Custom EG-600C 1980, Tokai Love Rock LS-55 1991, VOX Les Paul 1970′s, Hohner Telecaster 1970’s, Hohner Stratocaster 1970′s, Tokai Silver Star SS-36 1979, Jazz Bass 1978, Fender Squier 1993, Maya F335G 1970’s, K.Yairi TG-40 1977, Morris WL-40 1973, Morris WL-35 1970’s


Martin D-45

Bob Dylan 1975 with A. Ginsberg playing a Martin D-45
Bob Dylan in 1975 with A. Ginsberg playing a Martin D-45

Neil Young Martin D-45
Neil Young in 1971 playing his Martin D-45 which was given to him by Stephen Stills in 1969

I just found my Japan made Martin D-45 copy that I was looking for, at least for now. I have managed to became the very proud owner of a 1973 Morris W-40, which is as close to a Martin D-45 that my budget could allow. Ideally I would have liked a Yairi YW- 1000 but they tend to go for 1000-2000€ so I had to settle for a Morris W-40. I’ve read a lot of good things about Morris, at least the ones made in the 1970’s so hopefully I will not only look like Neil Young, I will sound like him too, or maybe not. It doesn’t have the vertical logo, which is a shame but those tend to cost 500-600€ if you get one straight from Japan and are pretty rare here in Europe. Well at least it has hexagon mother of pearl inlays and the beautiful 3-part back with Brazilian rosewood and maple. Let’s see how good it sound and looks when it arrives next week. Here are some random photos I found of other Morris W-40.

Morris W-40
Some random Morris W-40 pictures I found online. Moridaira (Morris Guitars). Founded in 1967 by Toshio “Mori” Moridaira, the Moridaira factory produced high-quality guitars, including the infamous Morris badged guitar.

Levin Model 13 Ambassadör

Levin Model 13 Ambassadör Made in Sweden 1950
Levin Model 13 Ambassadör Made in Sweden 1950

I have recently befriended Roger Häggström, a great luthier in Örnsköldsvik, Sweden. He is also the man behind my Levin Model 13 Ambassadör. It’s been great to hear from the man himself what he did to it to get it to play and feel so good. He created a new bridge and made new brass saddles to get it to intonate better, refretted it with brass frets, reset the neck, fixed up some cracks and touched up the lacquer. I think he did a great job, just look at it. I have so much things to learn but I’m really happy taking it one step at the time and who knows, maybe one day I will be as awesome as Roger. Here is his site GammelGura

Levin Model 13 Ambassadör
Body width: 400 mm, body length: 480 mm, scale length: 640 mm
Spruce top, walnut back and sides, 4-ply bound top, single-bound back
Mahogany neck with non-adjustable T-shaped duraluminum truss rod
Single-bound rosewood fingerboard with 18 frets and pearloid dot inlay
Single-bound headstock, rosewood bridge, nickel plated individual tuners
Sunburst finish and ten year warranty

Greco Spacey Sounds TL-500

Greco Spacey Sounds TL-500
Greco Spacey Sounds TL-500, Made in Japan by FujiGen in August 1979

Yesterday the newest member of my Greco family arrived from Japan. I went a bit bananas last week when I saw that my favourite eBay seller Tokyowax was selling a Greco Spacey Sounds TL-500 so I bought it straight away. These Greco TL-500 are pretty rare, there are about 3-4 Greco TE-500, the Thinline version, for sale on eBay at the moment but I have only seen 2-3 Greco TL-500 for sale in the last two years. I’m not sure if they produced more Thinline copies in late Seventies than normal Telecasters or if people refuse to sell them, but you rarely see these and when you do they are normally very expensive. I got mine fairly cheap since one of the string ferrules on the back was missing. Well I shouldn’t really call it cheap and now the import tax from Japan had increased as well, I had to pay 95€ instead of the normal 75-80€.  I didn’t have to do much to her, everything was pretty well set up already. The frets looked pretty bad so I polished them, oiled the machine heads, tightened all the screws and restrung her. She plays amazingly, even better than my old mistress, my Greco Spacey Sounds TE-500 Thinline copy. It might seem weird that I put my old “Nancy”, my Fender Telecaster TL52-75, up for sale and then bought a new one the same week. The truth is that even though I love my Japan made Fender, I don’t dare to use it since it’s in such a good state. I prefer guitars that are older than me and have a couple of battle scars already. I guess I’m also a bit gay for late 1970’s Greco guitars.

Greco Spacey Sounds TL-500

Greco Spacey Sounds TL-500
The body has quite a few marks on it but the back of the neck is like new and that’s the only thing I really care about.

Greco Spacey Sounds TL-500
The frets looked pretty bad so I masked the fretboard and polished them with 400 and 800 grit and then wire-wool. It looked like they had put the frets on before they applied lacquer to the neck and then after 35 years of playing half of it had worn off. The electronics seemed to be in good order and the guitar sounded awesome when I plugged it in so no reason to mess with that.

Greco Spacey Sounds TE-500N, Greco Spacey Sounds TL-500, Greco Les Paul Custom EG-600C
Greco Spacey Sounds TE-500N 1977, Greco Les Paul Custom EG-600C 1980, Greco Spacey Sounds TL-500 1979

Goya T-18

Goya catalogue 1965
Levin’s Goya catalogue from 1965

I’m very excited about my future Goya T-18 from 1966. I managed to find one in a fairly good state for a reasonable sum on eBay and couldn’t resist. I’ve decided that from now on I’m just buying Swedish made Levin acoustics, they were called Goya in the US. Since I haven’t received the guitar yet, it will probably spend a week or to in the customs office in Madrid, I have to stick to looking at old catalogues and dream. They have a review of a Goya T-18 from 1965 in the latest issue of Acoustic Guitar, under Great acoustics, 1965 Goya T-18 by Teja Gerken. I need to find a copy so I can get an idea of what I’ve got myself in to. It can’t be that different from my dad’s old Levin LT-16 also from 1966, which is among the best acoustic guitars I’ve ever played. The Levin LT-16 or Goya T-16, has alp spruce top and mahogany back and sides while the Levin LT-18 or Goya T-18, has alp spruce top and flame maple back and sides. The LT-18/T-18’s Goliath size is also a bit bigger than LT-16/T-16’s Grand Concert size so let’s see how the size in combination with maple instead of mahogany affects the sound. The LT-18/T-18The LT-18/T-18 was top of the line in the mid Sixties and cost $219.50 new in 1965.

Goya catalogue 1965
Levin’s Goya catalogue from 1965. Next I will have to find a Goya N-26 or Goya N-22 in sunburst from the mid 1960’s.

Levin LT-16 Made in Sweden 1966
My dad’s old Levin LT-16 from 1966

Fender Telecaster Japan TL52-75

Fender Telecaster TL52-75, ’52 re-issue, Made in Japan
Fender Telecaster TL52-75, ’52 re-issue, Made in Japan by FujiGen between 1987-1989

I have thought long and hard about it and now decided to put “Nancy” up for sale. It’s going to be sad to see her go but sometimes you have to sell things you love for the greater good of the collection. I’m going to focus more on Greco and Levin from now on. I also have two guitars on their way so I need to make some room for my new babies.

Fender Japan TL52-75
Fender Telecaster TL52-75,
’52 re-issue Made in Japan, FujiGen 1987-1989.
900€ SOLD
In mint condition, all original, without any doubts the best Telecaster I have ever played. Imported straight from Japan. The only reason for selling is because I prefer fat 70’s necks. There is no way to find the production year of these A-serial Telecaster with the serial number on the bridge plate. However, it must have been made between 1987 and 1989 since it’s a TL52-75. They were called TL52-70 between 1984-1986 and then changed to TL52-700 in 1990.

Fender Japan Twang catalogue 1989
Fender Japan Twang catalogue 1989

How to… refret a guitar

How to… refret a guitar
The shiny new Jescar FW47104 frets I put on my Tokai Love Rock LS-55 Les Paul Standard “Made in Japan” 1991

Here is a little update on my previous post on How to… refret a guitar. It turns out that maybe it wasn’t as easy as I first thought to level, crown and polish the frets on a guitar. I have had some small issues with both the Tokai that I refretted and my old Claescaster that I levelled the frets on. I didn’t pay enough attention to the height of the frets and I hardly used the fret rocker the first time around. This resulted in some buzzing when some frets were pressed down. I have now levelled, crowned and polished both guitars again and checked every single fret with the fret rocker to make sure they were all the same height. It would probably have helped if I had glued in the frets on the Tokai when I refretted it, which I didn’t in case I needed to take them out again for some reason. I think the frets not being glued in combination with the difference in the neck with and without the tension of the strings was enough to cause problems with on the Tokai. Now I when I levelled it again I pushed down the guitar to simulate the tension of the strings and that worked pretty well. The Claescaster was a lot easier, that was just a case of paying a bit more attention when I levelled the frets and actually use the fret rocker properly. When I first attempted to level, crown and polish frets it was evening so it got pretty dark and my main light source was the ceiling lamp above me. I have since learned that it’s a lot easier to get this done properly if you have light coming from the opposite side of you. This time I was working in front of the windows and had an even flow of natural light coming in which made it a lot easier to see if the frets were even and later during the polishing stage, if they were smooth enough. Both necks still feels a bit weird but I think that after a couple of hours of heavy playing, not playing heavy music just playing a lot, they will settle and even out a bit. Normally guitars feels weird even after just adjusting the bridge saddles, imagine after changing all the frets.

How to refret a guitar
I checked every single fret with the fret rocker and then marked any parts that was higher with a black marker. I levelled the frets and took extra care with the problem areas. I used a small Bahco file this time instead of the long fret leveller that I used last time. I checked with the fret rocker, levelled a bit more and then checked again until it was perfectly even.

How to refret a guitar
When everything was levelled I just had to crown the frets again and then polish them. I’ve realised that these little aluminium fret board protectors that I have used in the past doesn’t really work. If you have levelled and crowned the frets you have to run a sandpaper over the whole fretboard, feeling every single fret with your fingers to round them off, that’s the only way to get them smooth and nice. For that you really need to do it properly and tape the whole fretboard to protect it.

Guitar strings

How do you chose what strings to use? Do you listen to others, read reviews or actually try all the brands available? In my case I guess it has been a combination of what others are using, what I’ve read good things about and what I actually realised that I like. I don’t really know much about different materials or how some type of strings affect the sound in certain ways. I guess a big part for me has always been the price since I’m a hard hitter and tend to break strings a lot. When I was young I was poor and had to stick to the cheaper brands and now when I’m older and less poor I have too many guitars to afford to string them up with the best brands. I’ve always been stuck in the middle and changed brands many times depending on what’s affordable and popular in the country I’ve been living. I used Rotosound (Roto Reds 11-48) while I lived in the UK and now in Spain I’ve changed to Ernie Ball (Regular Slinky 10-46). The main reason why I changed from 11’s to 10’s was because I felt that I was old enough to use what I wanted and not care about what everyone else said. My whole life people around me have told me that the thicker the better, and that you are less of a man if you play on anything thinner than 11’s. Remember that Billy Gibbons uses 08’s and still has a pretty descent tone on his ‘Pearly Gates’ 1959 Les Paul. When I started to use 10’s my guitar playing changed completely, not only could I play faster but I also started to bend more and play in ways that I hadn’t been able to or bothered with before. My Telecasters stringed with 10’s are pure country heaven and way much more fun than before. I still use 11’s on my Hagström Viking and the Gretsch copy I have. At the moment I’m using Martin M175 (80/20 Custom Light Bronze Acoustic Strings 11-52) on my acoustics. Mainly because my girlfriend Araceli liked 11’s on her parlour guitars and it was easier to buy the same strings in bulk for both of us but also because I like to play acoustic like I play electric and don’t want to feel held back with too thick string gauge. I’m planning to put a set of 12’s or 13’s on one of my Dreadnoughts just to try if it really makes a world of difference to the tone. I would love to know what others are using and why. Please write a comment below and let me know.

Roto Sound roto reds 11
I used these for years but have now given up on 11’s

Ernie Ball Regular Slinky 10-46
My new found favourites, so smooth and easy to play without being too flimsy. I tend to buy them in bulk on eBay from USA

Martin acoustic guitar 11-52
Araceli and I tend to stick to these since you can get a 3-pack for 9,90€ from Thomann

Peavey electric guitar strings

Peavey acoustic guitar strings
I’m not proud to admit it but I do use Peavey’s discount strings occasionally. In Alfasoni you can get them for 2€ and they are perfect when you break a string or you just need to string up a guitar that you don’t use that much.

Kiso Suzuki WE-150, Made in Japan

Kiso Suzuki Violin Co. LTD. WE-150 Made in Japan
Kiso Suzuki Violin Co. LTD. WE-150 Made in Japan, 1980

Last night I restored a Kiso Suzuki WE-150. There wasn’t anything really wrong with it, it was just extremely dirty and the frets seemed to have been lying around in aquarium. I cleaned it for 2 hours, polished the frets and set it up and now it plays and sounds great. I changed the nut too, from plastic to bone, which improved the tone a lot. It’s actually one of the easier guitars I have played in a while even though it’s a dreadnought. I strung it with 11’s which I normally do on all of my acoustics so I can play them like electrics but this one felt extra easy to play. I tend to find dreadnoughts a lot stiffer compared to folk- and parlour sized guitars even with light gauged strings. I would like to keep it but it has to go so if you are interested you can find it in For sale.

Kiso Suzuki Violin Co. LTD. WE-150 Made in Japan
The frets was extremely dirty and full of something green that almost looked like moss. I cleaned, dressed and polished them and then oiled up the fretboard with lemon oil. I adjusted the neck and set it up so now it plays really well with low action without any buzzing. A great Japanese made Kiso Suzuki WE-150 from 1980 that looks almost new.