Greco TE-800
by claesgellerbrink
Greco TE-800, Made in Japan by FujiGen 1981
I finally found my “Nancy“, this has taken forever or at least four years. I used to have an amazing sounding and looking late 1980’s Japan made Fender Telecaster TL52-75, a great ’52 re-issue that I could never get used to the thin neck on. Then I found myself a 1979 Greco Spacey Sounds TL-500, equally great sounding but not in a mint state like the Fender, same problem there the neck was way too thin. So since 2013 I’ve been trying to find a nice Japan made ’52 re-issue with a thicker neck but without any luck. I don’t have large hands or anything, it’s just that since I mainly play old Levin acoustics from the 1960’s I’m kind of used to thicker necks than what’s standard on Japanese electrics. The solution turned out to be a an early 1980’s Greco TE-800 since they came with a pretty decent V-neck. It’s not the thickest neck I’ve seen or anything, it’s actually quite shy in thickness even though it’s a V-profile, but it’s far better that all the other Japan made Telecaster necks I’ve tried from the 1970-80’s. I’ve seen a few Crafted in Japan Fender ’52 re-issues from the mid 2000’s that has nice V-necks but nothing before that. The USA made Fender American Vintage ’52 Telecaster didn’t have it’s fat U-shaped neck until 1998 either, so this seems more like an 1980-90’s problem than purely a Japanese problem. I blame all the slick fast playing guitarists in the 80’s that wanted super thin necks, the ruined everything for the rest of us. The previous owner of the Greco TE-800, a really nice German man called Lennart, and I have had quite long mail conversations regarding this mythical creature, the unicorn of necks, the V-neck on Japan made Telecasters. In his expertise the V-profile appeared on the high-end Tokai, Greco and Fernades models around 1980-82. Something that I have had confirmed from early 80’s Tokai’s, both Strats and Teles I’ve seen for sale on eBay. This Greco TL-800 lost it’s original bridge at some point, with the serial number, but according the Lennart it must be from 1981. He has had a few other Greco TL-800 in his life and they apparently stopped with the V-shaped necks in 1982.
♪ ♫ ♪ Roy Buchanan – CC Rider
I really don’t mind how worn this Greco TL-800 is, it’s so beautiful in my eyes. Everything from the chipped fretboard to the cigarette burn on the back of the neck, I’m not sure how someone managed with that. The only part I don’t like is the Wilkinson bridge, it’s actually what I use on the Claescasters but on this guitar I would have preferred something older, more worn and perhaps Japanese. The Greco TL-800 has, beside the V-neck, Nitro lacquer and a Maxon neck pickup and the legendary DiMarzio Pre B-1 in the bridge. I’m not 100% sure that the DiMarzio is for me, it seems a bit too hot for my liking but I will try it with the band first and see how it works in a louder setting.
The wear only makes it cooler.
[…] managed to find another Greco TE-500N, unfortunately later that week I found my new Nancy, the Greco TL-800. Hence why I’ve decided to sell the Greco TE-500N, I can’t stop playing my Greco TL-800 […]
[…] sounds. Overall, an amazing Telecaster and a dream come true for me, even though my Japan made 1981 Greco TL-800 is equally […]
I was browsing about the TL800 on google and stumble upon your page. I am also a proud owner of a TL800 from 82 and it doesnt have V neck. Its very interesting reading your review and how greco stopped the v neck in 82 makes me want to get an 80 or 81 TL800 if I can find any. I just bought a SE800 the ad says its got big V neck but I havent got it yet. I have another mij strat a fender from 1994 and its got big V neck and its such a resonant and dynamic guitar to play. I think big neck really helps with the the whole resonance of a strat or tele.
I read somewhere that Yngwie Malmsteen only play Strats with big heads because of the resonance of the extra wood so perhaps there is something to it. I like V necks and chunky necks because they just fit my hand better but it make sense if it would affect resonance too.
Hey man may I know the serial number of this axe? If you still have it tho.
Hi there. I don’t have it, it was on the bridge plate which has been changed over the years.
Hi Claes,
Have you ever taken the neck off your TL-800? I’m investigating one at the moment, but it has an 8 digit serial number on the neck plate, and a different code inside the neck pocket. This doesn’t seem quite right to me and I am trying to find more information, so wondered what the neck pocket stamp looked like inside another TL-800, and also wondered if anybody knew what the codes mean?!
Thanks for any help you may be able to give,
Paul
I’ve never taken the neck off mine but what I’ve heard about these 800-series is that none of the numbers make any sense regarding year of manufacturing.