My new Claescaster is finally done. It was fun, rewarding and extremely annoying to build. If anyone plans to put a guitar together, make sure that you either stick to American parts or non American parts. To mix like I did was a nightmare since nothing fitted. I don’t think a single part fitted straight away, I had to make every hole bigger, or cut a bit here and sand a bit there. Anyway, now it’s done and I’m really happy with it. I just need to change the nut tonight for a Tusq and then we are all set.
Not the cleanest soldering but at least everything works
I wish the ground cables would have stuck a bit easier to the pot so the soldering wouldn’t have been such a mess. I also realised when I first plugged it in that the switch didn’t work since I had soldered 1-3 and 6-8 together, apparently 1 and 8 shouldn’t be connected.
Kluson style machine heads from Northwest Guitars
To fit the machine heads was pretty easy. Of course I had to make the holes bigger since they were 8mm and not 8.5mm as I was first told. I used a piece of wood to keep everything straight and to make sure they lined up. Then a tiny little pilot hole with the drill and in with the screw.
I originally wanted a 70’s decal and modern machine heads but I think I start to prefer the 50’s logo and the Kluson style machine heads
I read somewhere that this was a good trick to make sure you get the neck in the correct angle before you drill the holes. A piece of string through the body and around the two E strings to make sure that they are evenly spaced. I marked the holes with a hammer and a screwdriver before I drilled the pilot holes and then tried my best to keep the drill straight. A lot of people claim that you have to use a drill press but it works fine with a normal hand held drill.
Last thing to do, fit the pickguard
Of course the pickguard didn’t line up perfectly in the end so I had to cut out a bit more around the control plate. I used a knife and then smoothed it out with sandpaper around fat marker pen. I probably should have used a drill to make the pilot holes since the old nail and hammer tended to crack the lacquer in some places.
Last screw being marked out with a hammer and a nail
The Claescaster is finally finished
The old and then new Claescaster together
Look at the grain on the top one, the new swamp ash Claescaster, amazing. It weighs around 4.5 kg so a pretty fat little baby but it feels amazingly solid and nice around the neck. The old one, which is most likely basswood, weighs around 3.2 kg.
Earlier parts of the Claescaster story can be found here 1, 2, 3, 4.
Very nice result, congrats
[…] new Claescaster has been my office guitar for the last couple of weeks and I’ve really grown to love it. I […]
[…] their quality considering how the cheap they are. I have both Wilkinson tuners and bridge on my Claescasters, I love their vintage bridge with compensated brass […]
[…] a little order from my favourite Hong Kong site, EY Guitars. I wanted to change the pots on the new Claescaster, I’m really not happy with the fancy CTS pots I got and decided to put on some Asian ones […]
[…] I’m so in love with my Greco‘s, every time I pick one up it hits me how good they feel to play. They might not be the best built guitars to ever come out of Japan but they all have something special, here is a list of Japanese guitar brands. I only have 3 in the 500-series and I have never tried anything in the 1000-series so I can only speak about the cheaper Greco models. I would say that the best built Japanese electric I own is my Fender TL52-75 and the best acoustic would be the K.Yairi TG-40 or my Morris W-40. Having said that, there is something that makes me like my Greco’s more than all the others, more than my Fender, my Tokai LS-55 and even the fabulous Fernandes RST-50 I sold that I really liked, and still miss a bit. There is a resonance in the wood on my Greco’s, especially on my Greco TL-500, that I haven’t felt in my other Japanese guitars. I’m not sure if it’s down to the brand, the factory or their age. All three were made in the late 1970′s by FujiGen, I have actually never tried a Matsumoku made Greco, they changed factory around 1974-75. In my opinion FujiGen built better guitars than Matsumoku, having said that this could be down to years rather than factories, read about it here: Are all Japanese guitars good? I have two Westone guitars made by Matsumoku and three Greco’s and one Fender made by FujiGen and I feel that later are way better, again could be down to brands and years rather than factories. The Hohner Strat I have might have been built by Morris, but out of the cheapest materials around, before they started up H.S. Anderson and all of that. Now I’m seriously considering extending the Greco collection with a nice late 1970′s Strat, ideally a Greco SE-500 in a three-tone sunburst, just like my Claescaster. […]
[…] night I decided to change the pots and install a treble bleed on my new Claescaster, I never liked the feel of the CTS pots I had on. I’m still not sure if I like the new […]
[…] always been totally gay for the 3-tone sunburst that Fender used in 1970’s. I even built the Claescaster because of this, since I couldn’t find a Telecaster with the right colour I decided to […]
[…] have a great backup acoustic for playing live and I was missing something in sunburst to match the Claescaster I put together four years […]