Tag: UK

VOX, Made in Japan

VOX Les Paul Made in Japan 1970'sVOX Les Paul Made in Japan 1970’s 

I recently found a nice looking VOX Les Paul copy that I couldn’t resist. I had decided not to buy any more Les Paul’s after I sold my Westone a few weeks ago but this was just too nice to miss out on. It has a bolt on neck, which you could either hate or love, I’m fairly indifferent myself and you can read why here. The good part with bolt on necks is that they are so easy to adjust. It’s fairly common that older Les Paul and SG guitars with set necks gets a hump over the neck joint, something that can cause buzzing and you have to either raise the action or level the fretboard to get rid of it. The bad part with bolt on necks is the second hand value, a lot of people are still a bit racist when it comes to Gibson copies with a bolt on neck even though Gibson built a few themselves in the early 1980’s. What I fell in love with on this VOX was the flame top and the thickness of the neck, it’s so nice. It feels even fatter than my Tokai Love Rock LS-55 which has a fairly accurate 59′ Les Paul neck. This VOX even have the small head as the real Gibson of the late 1950’s and the pickups sounds pretty close to my old Westone. The only thing that is annoying me a bit is that I haven’t figured out who built it yet. There is no info about VOX in my list of Japanese guitar brands, well there is a Magnavox and a Univox but that’s not the same. The only thing I know is that when VOX stopped making guitars in the UK they moved to Italy before they ended up in Japan. The build quality is not as good as my 1991 Tokai Love Rock LS-55 or my 1980 Greco EG-600C, but it’s easily on the same level as the Westone which was built by Matsumoku. Even though I really enjoy this Les Paul I have too many guitars and is therefore up for sale.

VOX Les Paul Made in Japan 1970'sVOX Les Paul Made in Japan 1970'sIf anyone happens to have more information about Japanese made VOX guitars please get in touch


Levin LM-26

Levin LM-26 1959Levin LM-26 1959Update: January 26, 2014 My Levin LM-26 from 1959 is now finished

Levin Goliath ad 1962
Bell ad from 1962 for the wonderful extra large sized Levin Goliath Model 1795

As I mentioned in my previous post about Levin I managed to win a Levin LM-26 on eBay back in December. It turned out to be in a worse state than I expected which I guess is both good and bad. Bad because it’s unplayable so I still don’t know how it sounds, good because I’m forced to learn a lot of new things, like how to remove the neck on an acoustic guitar. The Levin LM-26 was sold as The Levin Goliath Model 1795 in the UK and I think they sold pretty well, even Pete Townshend had one. They have spruce top with flame maple back and sides, all solid as always with Levin. If you want to know how old your Levin or Goya is then check Vintage Guitars Sweden. Levin serial numbers / Goya serial numbers

The Who in 1963 as the Detours, Pete Townshend playing a Levin Goliath LM-26
Pete Townshend is playing a Levin Goliath LM-26 in 1963 with Detours, later The Who

Levin LM-26 / Goya M-26
Goliath size: Body width: 400 mm, body length: 505 mm, body depth: 95/120 mm
Fingerboard width: 43 mm, scale length: 630 mm
Spruce top, flame maple back and sides, 4-ply bound top, single-bound back
Mahogany bolt-on neck with adjustable truss rod
Metal truss rod cover with a star and “1900”, nickel plated tuners
Single-bound rosewood fingerboard with centered pearl dot inlay, rosewood bridge
Sunburst finish and ten year warranty

Marketed by U.K. distributors as Goliath Model 1795.

Levin LM-26 1959Levin LM-26 from 1959, well the body is actually stamped with a number from 1958, the year this model was introduced. I’m not sure if they used an old body when they put they guitar together at the Levin factory in Gothenburg in 1959 or if someone changed the neck when the guitar came to the UK. The previous owner for the past 51 years, Roger, bought the guitar second hand in 1963 for £40 from Bill Greenhalgh Ltd, 125-127 Fore Street in Exeter. Roger changed the original machine heads to Grovers in 1965, it’s otherwise all original. The action was so high that I could almost fit my hand under the strings so I had to remove the neck and reset it. There are a few things that needs to be glued as well, the back is lose and there are 2-3 cracks in the top.

Levin LM-26 1959I have never removed a neck before so I was pretty nervous about this part. It’s supposed to be one of the trickier things to sort on an acoustic guitar but luckily this neck was fixed with the Levin bolt-on neck system which made it a lot easier. I removed the two bolts inside and the heel came lose straight away, now I only had to loosen the fretboard overhang. I removed the pickguard with a razor blade, cutting under the edge, just to make sure I wouldn’t melt or damage it while removing the neck. Then I used a normal clothes iron to heat up the fretboard, I don’t have any fancy pants Stew Mac tools or special gadgets. I heated up the fretboard for 1-2 min and felt with my hand every 30 sec to make sure it didn’t get too hot, I thought if I could still touch it maybe I wouldn’t burn or damage the lacquer on the top. It took ages to get it off, I think I probably spent 1-2 hours per night for 3 nights in a row on this. The glue loosened more and more and in the end I could get a flat screwdriver in and bend it loose. Unfortunately a chunk of spruce decided to stick to the neck instead of the body but to be honest I expected worse damage than that on my first attempt to remove a neck. I used my clothes steamer and steamed the spruce loose from the mahogany neck, it peeled right off, and just glued it back in the neck pocket again.

Levin LM-26 1959
I masked off the top and sanded the pocket even so now the neck will fit fine once I’m ready to put it back on. I had to get the gap on the back closed. I’m not a master gluer and since you pretty much just get one shot, or rather it’s really annoying to remove and re-glue things if they aren’t perfect, I was a bit concerned about this too. I used plenty of fish glue and then 4 strong straps that could not only press in the back but also press down the the sides to close the gap as much as possible. I’m pretty pleased with the result, the gap is gone and it seems pretty solid.

Levin LM-26 1959Next thing was to try to close the cracks on the top. One was all the way through and two was smaller hairline cracks. I filled everything with fish glue and used a suction cup to try to push in the glue in the cracks, I saw this on Youtube and it made sense to me so I tried it. Then I just strapped everything up and put a piece of wood the keep the main crack flat while it dries.

Levin LM-26 1959Once I had glued the cracks in the top, the first image shows before I started, I painted and lacquered the crack. I used normal matt black acrylic paint for the dark parts and just darkened the rest with furniture oil before I applied the nitrocellulose lacquer. Once the lacquer was dry I sanded the surface smooth with 400, 800, 1500, 2000 and 2500 grit. It worked really well, it’s actually hard to even see the big crack that went all the way from the edge to the bridge. I removed the old glue from the pickguard and then glued it back again. 

Levin LM-26 1959The neck was in really poor state, deep groves and marks all over it. I filled it with nitrocellulose lacquer, as mentioned in my previous post about how to repair lacquer damage. I had to take out the heavy artillery in order to get the neck smooth and used 180 grit. Then it was just a matter of sanding it back to it’s former shine using 400, 800, 1500, 2000 and 2500 grit. You can still see the marks but the neck is perfectly smooth and shiny again.

Levin LM-26 1959
According to Roger the guitar has been stored in a back room in it’s case for the last three decades and I guess the humidity wasn’t ideal, hence the cracks. As soon as I got the guitar I started to humidify it with a wet sock in a plastic container inside the body and then sealed of the hole with a lid from a Mercadona lunch box. The Grover machine heads from 1965 got a good clean and is now oiled up and works fine.
In the last picture you can see what lied hidden in the accessory compartment in the old hardcase. Old guitar and banjo strings, an old sellotape box full of fingerpicks and best of all, an original Levin trussrod key. I’ve been looking all over for one of these. Thank you Roger.

Movie of the day

Not really related to music, or guitars, but if you like The Wicker Man like I do, then you will love this.

The Power Of The Witch is a documentary about witchcraft as it was practised in the late 60s and early 70s in the UK – apparently it was only screened once and there is practically no information about it on the web. The Power Of The Witch is worth a watch even if you are not particularly interested in the occult – rather watch it as a document of its time, capturing as it does people’s attitudes, beliefs, fashions and plummy Brit accents. It’s a curious mixture of patriarchal stiff upper lip-ism and unerring belief in both Christianity and the forces of magic, making it feel very much as if it comes from a completely different era. Not to mention, it’s a goldmine of potential witch haus footage. Taken from Dangerous Minds

Movie of the day

More awesome documentaries from the BBC. First out, David Bowie – the story of Ziggy Stardust, and after why not enjoy Kings of Glam for a full night of 70’s fun.

Movie of the day

Hondo II P-bass

Hondo II P-bass

My friend Dani bought himself a Hondo II P-bass copy the other week, well I had to buy it for him since he doesn’t have a eBay account. I took it home and spent my Sunday morning with her,  it wasn’t much work needed. The electronics are pretty old but it works and sounded pretty cool so I think we should keep it as it is for now. However, the actions was extremely high so I had to first adjust the trussrod a bit and then put in a shim in the neck pocket to get the angle of the neck right. Now it’s as low as it can go without any buzzing and it feels really nice to play.

This bass is now for sale.

Hondo II P-bass I love the wood grain, really beautiful. We bought the bass from a UK seller but it seems to have been sold in Canada originally.

Hondo II P-bass Pretty descent wood, good weight and really solid. I’m not really sure what type of pickup that is but it works and sounds good. I folded a business card and used as a shim to get the neck right and to lower the action. I couldn’t find any markings anywhere so we are still not 100% that it is made in Japan, it could be Korean made. Anyway, it feels really nice and seems to be pretty good quality so it doesn’t really matter.