Tag: Tele

Vorg by Pearl

Vorg by Pearl Telecaster Made in JapanVorg by Pearl, built in Japan by Matsumoku in the mid 1970’s

I recently got myself a Vorg Telecaster. These where built by Pearl in the Matsumoku factory and named Vorg for the German market. The previous owner claimed that it was built in 1977 since the serial starts with 7 which could be true, it’s built in the mid 1970’s for sure. It’s all original except for the machine heads which has been upgraded to a set of Schaller. The guitar has been converted to a string through with bushings on the back instead of being top-loaded something that obviously improved the sustain and overall tone. The original pickups looks like they were made by Maxon, something that makes perfect sense for a Matsumoku built guitar of that time. The neck is fantastic, really chunky for being a Japanese guitar. It’s a great sounding and playing Japanese Telecaster that I unfortunately can’t keep. I bought it for my birthday last month but the same week I found another late 1970’s Fender Telecaster so this Vorg has to go. It’s for sale here.

Vorg by Pearl Telecaster Made in Japan

The new Claescaster

The new Claescaster, my first attempt at building a guitar

As I mentioned before I’ve been pretty busy building a Telecaster from scratch. I have never built anything in my life so this was more of a test to see how hard it was to shape a body, carve a neck, install a trussrod and frets and get it to intonate and actually play properly. It wasn’t that hard. I would say that with some patience this could be done by pretty much anyone. Now I will start to build something a lot prettier and use what I’ve learned from my mistakes the first time around. I promise to take a lot of pictures so you can follow the whole process. You can follow me on Instagram.

The new Claescaster

Claescaster, hand built guitar, How to build a Telecaster
I’ve been fairly busy lately building a Telecaster from scratch. I really should have taken more pictures to document the whole journey but I felt that this first one would be more about figuring things out since I’ve never built anything before. The next one will be well documented and hopefully look ten times better than this first rough cut little Telecaster built from some pine that I found in the street. Now I just need to install some frets, hardware and give it a coat of paint. You can follow me on Instagram.

How to… change the nut

I have never been too impressed with the cheap plastic nut on the Claescaster. When I first got it I brought the guitar to work and used it as my office guitar and after six month of heavy playing most of the string buzz was gone, but not all. I truly believe that if you do any changes and things doesn’t sound perfect straight away then just ignore it for a week or two and let the guitar settle a bit. If I get any slight buzzing or things feels weird after I have adjusted the bridge or saddles on my guitars I tend to leave it until the problem disappears, which it almost always does.  However, after two years of playing the Claescaster like crazy I felt that the last bit of buzzing wouldn’t go away unless I changed the nut. I have drilled, soldered and screwed in my guitars, adjusted necks and changed things around but I have never dared to remove a nut. It just felt like one of those things you couldn’t do by yourself. After 3 glasses of cava at work I felt I had the Dutch courage needed to take on this daunting task so on my way home I went passed Herrera Guitars,  my favourite guitar shop in Barcelona, and bought a TUSQ PQ-5010-00 slotted nut for Strat and Tele. I started with removing the old nut, something that was way easier than I expected. I took some watch tools, finally I found some use for those, and just lightly tapped the nut from one side with a watch back opener and small hammer, it came loose straight away. I cleaned the slot a bit, removed some left over glue with a knife and then sanded the sides to make it slightly wider to fit the new nut. The TUSQ was a lot bigger than I expected, I did measure the old nut a couple of days ago but maybe I mixed up the measurements or I got the wrong nut because this one was almost 3 mm longer than the existing one, even though the string spacing was the same. I took the old nut as a reference and made a mark on each side and then just cut off the excess with a knife on the chopping board, it’s a very easy material to cut and work with. I filed down the edges with a sandpaper and also scratched all sides so the glue would stick better. Now it was just down to put some super glue in the slot, probably not the best glue for this but the only one I had at home, and then gently tap down the nut in its place. Done. I have to say that this was way easier than I expected and everything went really well. I should of course have masked off the wood with some tape not to scratch it but I was too excited to take those kind of precautions. Now with the new nut fitted this neck is a joy to play, it’s a world of difference. I feel that both tone and resonance has improved a lot and I can easily recommend TUSQ.

How to change the nutThe old plastic nut that this cheap neck came with

How to change the nutA watch back opener and a little rubber hammer turned out to be excellent tools for this

How to change the nutIt was way easier than I expected to remove the old nut

How to change the nutI scraped off some leftover glue with a knife

How to change the nutSome sandpaper got the surface smooth and I also needed to widen the slot a bit to fit the new nut

How to change the nutNot the best cut nut slot but I didn’t really expect more from this neck

How to change the nutThe new TUSQ PQ-5010-00 only cost 8€

How to change the nutPerfect fit

How to change the nutA tiny bit of glue and then just gently tap the new nut in it’s place

How to change the nut All set, a new nut is fitted on the Claescaster