I managed to find another Morris W-50, this time with hexagon inlays instead of snowflakes as on my earlier Morris W-50. They sounds pretty similar, very rich and full tone with clear highs. I guess the 3-piece back is adding to that full sound and of course it makes them very pretty to look at too. In my opinion these TF Morris guitars are almost up there with K. Yairi and the best Japanese builders. It doesn’t look like Brazilian rosewood, but it has some really nice figured dark rosewood back and sides with quilted maple in the middle and a solid spruce top.
The guitar came from a collector in Scotland and was ready to play when it arrived, I didn’t have to do anything to it.
The two TF Morris W-50 together, the left one from around 1976 and the right from about 1979
I recently got myself a Morris W-50, my third Morris and it sounds as good as the other two. Solid spruce top and it looks like the back and sides are solid Brazilian rosewood and quilted maple. It was pretty beat up when I got it from Guitar Hiro in Madrid with plenty of dents and a cracked back but now I’ve fixed it up a bit and it’s playable again. It’s a nice Martin D-42 copy with snowflake inlays and the typical Martin volute where the head and neck meet. Nice inlays all around and a beautiful 3-piece back with flamed maple and rosewood. I guess it was made around 1976 since they changed to hexagon inlays in the 1979 catalogue and then renamed them from W-50 to TF around 1983.
TF Morris W-50, Made in Japan around 1976
Morris Japan catalogue 1976
There was a bit of work needed on this guitar. The back was cracked in the binding just below the heel which made the whole neck tilt forward causing a pretty high action. I cleaned out the crack, someone had put some super glue in there, filled it with fish glue that I let really sink in and connect with the neck block, clamped it and left if for 48 hours. Now it seems really solid and the action got so low that I had to make a new higher bone saddle for it. There was a lot of dents and marks on the back of the neck so I filled them with nitro lacquer and sanded it smooth and buffed it up with metal polish, here you can read more about how to repair lacquer damage. The only thing left now is to ad some gold machine heads so I ordered a set of open back Schaller ST6 this morning and will fit strap button and an endpin jack tonight.
I recently changed the machine heads on my 1970’s Japan made Morris W-50 to Wilkinson WJ28NGD open gear in gold and I couldn’t be happier
Moridaira (Morris Guitars) Founded in 1967 by Toshio “Mori” Moridaira, the Moridaira factory produced high-quality guitars, including the infamous Morris badged guitar. Moridaira also produced badged guitars for Hohner including Coronado, Futurama, H.S. Anderson, Lotus (some) and Sakai.
Westone Stratocaster copy, made in Japan by Matsumoku in 1979
This weekend my Westone Stratocaster found a new owner. It felt kind of sad, I don’t normally miss guitars that I sell, well that’s I lie, I have missed all of the guitars I’ve sold but normally not this much. Oh well, I needed to make room for my new Tokai Silver Star SS-36 so it had to go. I have had two Westone guitars, a Strat and a Les Paul copy and I really liked both of them. Westone built Fender and Gibson copies in the late 1970’s before they started on their own heavy metal influenced creations of the 1980’s that owned the brand it’s name. You can read more about the brand Westone here. I have to say that the quality was pretty good for being a less known brand from the Matsumoku factory. I’ve always claimed that FujiGen was better than Matsumoku but I start to think that might have been more about when and not so much where. There was a huge change in Japanese guitars around 1975, not just the quality but perhaps more about how well they managed to copy the big American brands.Therfor a Greco guitar from 1978 would be better built than one from 1972, not just because the first was made by FujiGen but because it was made after 1975. You can read more about in my earlier post, Are all Japanese guitars good? I think what I would miss most of the Westone Strat is the Sen ash body, the wood was amazing and without any doubt the heaviest and most solid Strat I have ever seen with a fantastic sustain. The pickups were pretty great too, not Grey Bobbin pickups like on my Tokai Silver Star SS-36, but still, pretty sweet sounding. The pickups were pretty great in the Westone Les Paul too, maybe there was something special about these late 1970’s Matsumoku built Westone guitars.
Westone Les Paul copy, made in Japan by Matsumoku in 1970’s
Matsumoku Matsumoku is one of the Japanese manufacturers that did not survive long after the heyday of the 1970’s guitar market despite having a long tradition of quality stringed instrument craftsmanship. Matsumoku produced guitars for major manufacturers Greco, Guyatone and Yamaha. Matsumoku made Arai, Aria, Aria Pro II and Aria Diamond badges, with Aria being their primary badge for a majority of this time frame. Badged guitars known to have been made by Matsumoku include Apollo, Arita, Barclay, Burny, Capri, Columbus, Conrad, Cortez (electrics only), Country, Cutler, Dia, Domino, Electra, Epiphone, Granada, Hi Lo, Howard, Ibanez, Lindberg, Lyle, Luxor, Maxitone (this guitar differs from Tama’s Maxitone badge), Mayfair, Memphis, Montclair, Pan, Pearl (electrics only), Raven, Stewart, Tempo, Univox ,Vantage, Ventura, Vision, Volhox, Washburn (in 1979 and 1980), Westbury, Westminster and Westone. Possible Matsumoku badges include: Bruno, Crestwood, Conqueror, Eros, Mako, Memphis, Orlando and Toledo. Taken from my previous post about Japanese guitar brands
On Saturday I found myself a Maya F335G. As mentioned before, I’ve been after a Gibson J-45 or J-50 for quite a while so when I saw this Japan made Gibson J-50 copy I couldn’t resist. It was in a terrible state and strung with 4 nylon strings so I couldn’t test it but I trusted my gut feeling. It doesn’t sound like a Gibson J-50, I didn’t really expect it too either, but it does sound pretty good. I would say that it sounds better than the two Suzuki’s I used to have, the Kiso Suzuki WE-150 and Suzuki Three-S F-120, even though the build quality is pretty much the same. There is a huge step up to my Morris WL-35 and Morris W-40 and my beloved K.Yairi TG-40, both in build quality and sound. Having said that, there is something with this Maya that I really like, it has way more bass then the Suzuki’s and overall a pretty nice and full sound. The only downside is that it feels pretty stiff to play so I will probably put 011’s on it next time I change the strings. According to my previous post about Japanese guitar brands Maya was made by Chushin Gakki in Kobe, Japan, during the 1970-80’s. Even though I really like this guitar I have it listed for sale if anyone is interested in buying it.
Maya F335G made by Chushin Gakki in Kobe, Japan
The previous owner had used a collection of random oversized wood screws to keep the machine heads in place so the first thing I did was to remove them and fill the holes. I polished the frets and oiled the super dry fretboard and then put on a bone nut and saddle which improved the tone quite a lot.
I’ve always been a huge fan of White Falcons but never really felt I could afford one. They are so over the top Las Vegas bling but still works so well on scruffy looking musicians like Neil Young, see below. I’m not overly keen on newly made acoustic guitars, I believe that everything sounds better after 20 years, but after seeing this I have to admit I have second thoughts. Gretsch has just launched a White Falcon acoustic, and not only does it look awesome, it’s cheap too. Compared to a White Falcon that cost around 3200€ it feels pretty cheap with 550€ for the new Rancher Falcon in white. It’s almost as exciting as when Fender released the Fender Japan TN72G-FT.
Jack White is doing a surprise gig at the South by Southwest festival Austin Texas in 2011 with a custom made Gretsch White Falcon acoustic. When I saw this picture I really felt that I wanted one too. I have an all black Morris WL-35, really Johnny Cash, but imagine to have an all white Gretsch guitar with extra gold. Hmm, gold, I love gold.
I’ve recently come across I pretty good source for old catalogue scans for Japan made acoustic guitars. It’s called oldguitar and has about 50 different Japanese guitar brands represented, some brands has more scans than others and most of them are in Japanese but it still pretty nice to see your guitars in old catalogues. Unfortunately I only managed to find my Morris W-40, K. Yairi TG-40 and Suzuki Three-S F-120, my Morris WL-35 and Kiso Suzuki WE-150 seems a bit harder to track down.
I’m still trying to figure out what I like and what I’m after when it comes to acoustic guitars. It’s a quite new thing for me, to play acoustic. I mentioned in an earlier post that it’s a bit like understanding and appreciating fine wine, you need to train your pallet and know what you are looking for, otherwise wine just taste like wine and acoustic guitars sounds more or less drang drang. I’m not sure if all Morris are as good as the two I got but these sounds better than pretty much anything I have ever heard before. I love the look of the Morris W-40 but it’s not as well sounding as the WL-35. I guess the W-40 has that typical Martin D-45 sound, a really dark bass and still nice highs, but a bit weak on the treble side for me. It’s not that good for finger picking, it’s lacking a bit of volume on the high E and B string, something that might be because of the light string gauge, I’m using 11’s at the moment. I’m going to string it with 12’s and see if the volume improve. The Morris W-40 still has one of the best sounds for open chords playing that I’ve ever heard, so much warmth and body, I guess because of the Brazilian rosewood. The Morris WL-35 is probably a better all-round guitar, finger picking, chords, solo playing, everything sounds good on it. I’m just struggling a bit since it’s so big. I think it’s based on some old Guild model, at least the head looks very Guild inspired. Anyway, I can strongly recommend Morris as a brand to anyone looking for a good sounding high quality built Japan made acoustic.
Moridaira (Morris Guitars) Founded in 1967 by Toshio “Mori” Moridaira, the Moridaira factory produced high-quality guitars, including the infamous Morris badged guitar. Moridaira also produced badged guitars for Hohner including Coronado, Futurama, H.S. Anderson, Lotus (some) and Sakai.
TF Morris W-50, Made in Japan around 1979
The guitar came from a collector in Scotland and was ready to play when it arrived, I didn’t have to do anything to it.
The two TF Morris W-50 together, the left one from around 1976 and the right from about 1979
Morris Japan catalogue 1979
Claescaster 