Claescaster

Tag: Matsumoku factory

Guitars for sale

I’ve decided to thin out my electric guitar collection as well so if you see anything you like, just get in touch claesgellerbrink@gmail.com

Fender Stratocaster Made in USA 1979, 3 tone Sunburst, hardtailFender Stratocaster, Made in USA, Fullerton plant 1979, 1650€ SOLD
A late 1970’s hardtail Fender Stratocaster in a classic 3-tone sunburst. The neck is stamped with 1978 but body, pickguard and pickups says 1979, very common on late 1970’s Fender. All hardware is original but the volume pot and 5-way switch has been changed and the middle pickup is a bit of a mystery, neck and bridge are original Fender and stamped 1979. It’s in really good state for its age with just a few marks to the body, the grain is amazing and it looks like it’s a one piece ash body. The back of the neck is in great shape just like the original jumbo frets and fretboard. It sounds and feels awesome. You can read more about the guitar here and here and watch this Youtube clip.

Greco Spacey Sounds TL-500Greco Spacey Sounds TL-500, Made in Japan 1979, 800€ SOLD
This is as close to a vintage Japan made Fender Telecaster you can get, built in the same FujiGen factory just before Fender gave the contract to build the first JV, Japan Vintage, series there. Greco is well known for their build quality and the sound of their Maxon pickups. This is an all original Greco TL-500, built in August 1979. The neck and frets are in great shape but there are some chips and marks around the body. You can read more about the guitar here.

Tokai Silver Star SS-36 Made in Japan 1979Tokai Silver Star SS-36, Made in Japan 1979, 750€ SOLD
This is a beautiful looking Tokai Silver Star with great grain showing through the 3-tone sunburst. It’s all original and in really good state for its age with hardly any marks. Tokai together with Greco was without any doubt the best Japanese copies in the 1970-80’s and the reason why Fender started to produce guitars in Japan, first through FujiGen and later the Tōkai Gakki factory. It has great sustain and together with the legendary grey bobbin pickups it sounds amazing. You can read more about the guitar here and listen to it in this Youtube clip.

Tacoma Stratocaster Made in Japan 1970'sTacoma Stratocaster, Made in Japan 1970’s, 400€ SOLD
This great looking Tacoma Stratocaster was made in Japan in the late 1970’s, most likely by FujiGen since it’s so similar to a Yamaha Super r’n Roller. It’s all original and in really good state for its age with hardly any marks. Neck, fretboard and frets are fine, it has great sustain and the pickups sounds great. You can read more about the guitar here and listen to it in this Youtube clip.

Greco Les Paul Custom EG-600CGreco Les Paul Custom EG-600C, Made in Japan 1980, 750€ SOLD
This is as a great looking FujiGen built Greco Les Paul Custom copy with gold hardware. It’s all original and in great shape for it’s age. Greco is well known for their build quality and the sound of their Maxon pickups. The neck, fretboard and frets are in great shape and there is hardly any marks to the body.  These Greco’s are of course set neck Les Paul copies and of way better quality then all the bolt-on neck guitars built by Matsumoku and other factories. You can read more about the guitar here.

CG Winner AO-410 Made in Japan Neck trough late 1970'sC.G. Winner AO-410, Made in Japan, early 1980’s, 350€ SOLD
A great sounding C.G. Winner AO-410, a well built double cutaway neck trough guitar made in Japan. The brand was created by Clarence Griffith Winner (C.G.Winner), an American luthier and close friend of Leo Fender and built by Matsumoku in Japan, the same factory as Ibanez and Aria Pro II. These guitars are supposed to have Di Marzio humbuckers but I can’t see any markings on them so there might be normal Maxon pickups in this one. It has an awesome baseball bat neck, really fat and nice and plays really well. The hardware is a bit tarnished but it’s in overall really good shape for the age, the neck is straight and frets are fine. You can read more about the guitar here and watch this Youtube clip.

Guitars for sale

Martin SPD-16R Made in USA1999Martin SPD-16R, Made in USA 1999, 1500€ 1300€
Martin SPD-16R is a Special Edition Dreadnought from Martin guitars. Spruce top and Indian Rosewood back and sides with forward shifted scalloped X bracing. Performance taper, low oval mahogany neck with rosewood fretboard and bridge. Snowflake inlays, abalone rosette and a D-45 style back strip with gold Martin stamped machine heads. Produced in USA between 1996-2001. The guitar is in fantastic shape for being 18 years old with hardly any scratches and no fretware. The top has a hairline crack from the bridge down which has cracked the lacquer but not the wood. SPD-16R stands for Special edition, Dreadnought, 16-series in Rosewood. This guitar looks great and sounds amazing, you can read more about it here and listen to it in this Youtube clip.

Gibson J-45 ADJ 1965 Made in USAGibson J-45 adj, Made in USA 1965, 2300€ SOLD
An awesome looking Gibson J-45 ADJ, built in the Kalamazoo factory in 1965. It’s the classic round shouldered Gibson dreadnought, natural finish spruce top, mahogany back and sides, rosewood fretboard and bridge. All original except for the refinish which turned this J-45 in to a J-50. Apparently this was done in the early 1970’s when the slight separation in the tops mid seam was glued. The guitar looks really great, worn but still well preserved for being 50  years old. The sound is just amazing, it has that typical Gibson bass response that you can hear on the early records of James Taylor and Jackson Browne. I cut a new bone saddle for it but it comes with it’s original adjustable rosewood bridge. It has an endpin jack already installed so it’s ready to play live, just ad a pickup. A brand new flight case is included to protect the guitar. The action is low and there are no structural issues with this guitar, just the normal marks and scratches. You can read more about the guitar here and listen to it in this Youtube clip.

Gibson B-15 Made in USA 1969Gibson B-15, Made in USA 1969, 1200€ SOLD
This 1969 Gibson B-15 sounds and plays great and is pretty good shape for it’s age. There is a lot of scratches and wear to the top and sides but the are no cracks or structural issues. It’s all original and even comes with the Gibson made alligator chipboard case. The action is good and the frets has very little wear. The B-15 was an all solid model with a natural finished mahogany body, a mahogany stained spruce top and rosewood fretboard and bridge. Gibson referred to the B-series as student models at the time which is a bit misguiding considering what a student guitar sounds like today. These have great even tone and pretty amazing sustain for the size, a perfect little blues machine. You can read more about the guitar here and listen to it in this Youtube clip.

Harmony Monterey, Made in USA 1950's 784H1325Harmony Monterey H1325, Made in USA 1950’s, 550€ SOLD
Very cool looking US made archtop from the late 1950’s. Solid spruce top with birch back and sides, 16 1/2 in wide grand auditorium size, steel reinforced neck. This guitar is all original and even comes with the original case. There is a glued crack on the side but no other issues. It sounds great, loud and clear acoustically. You can read more about the guitar here and listen to it in this Youtube clip.

K. Yairi YW-1000 Made in Japan 1973K. Yairi YW-1000, Made in Japan 1973, 1700€ SOLD
This is the top of the line, the fanciest guitar that K. Yairi built. Their Martin D-45 copies are legendary for their sound and build quality. This guitar has real Brazilian Rosewood back and sides and a beautifully aged solid spruce top. Real abalone inlays all around and the typical Martin volute where the head and neck meet. At the moment this guitar has Wilkinson WJ28NGD open gear machine heads in gold fitted but I still have the original K. Yairi machine heads. It’s all original except for the bridge which is a brand new hand cut and shaped replacement in ebony with a bone saddle and ebony bridge pins. The guitar is in great shape for being 43 years old but there are a couple of scratches to the top, one big one close to the bottom. The neck is straight, trussrod works and the action is low. The guitar sounds amazing, so deep and clear at the same time. These K. Yairi YW-1000 are extremely rare in Europe and without any doubt the closest you can get to a real 1970’s Martin D-45. You can read more about the guitar here and listen to it in this Youtube clip.

Morris W-50 1970's Made in JapanMorris W-50, Made in Japan 1970’s, 700€ SOLD
Nice Martin D-42 copy with real abalone hexagon inlays and the typical Martin volute where the head and neck meet. Solid spruce top with nice inlays all around and a beautiful 3-piece back with flamed maple and dark rosewood. The guitar is all original and in really good shape for being over 35 years old but with some scratches, one slightly larger on the top. The neck is straight, trussrod works and the action is low. The guitar sounds great, very clear and Martin like. You can read more about the guitar here and listen to it in this Youtube clip.

Morris W-50 1970's Made in JapanMorris W-50, Made in Japan 1970’s,650€ SOLD
Great looking Martin D-42 copy with snowflake inlays and the typical Martin volute where the head and neck meet. Solid spruce top with nice inlays all around and a beautiful 3-piece back with flamed maple and dark rosewood. The guitar is all original and in really good shape for being over 35 years old but with scratches and marks around the body. It has Wilkinson WJ28NGD open gear machine heads in gold installed now but the original will be included. The neck is straight, trussrod works and the action is low. The guitar sounds great, very clear and Martin like. You can read more about the guitar here and listen to it in this Youtube clip.

Morris W-40 1973Morris W-40, Made in Japan by Terada 1973, 500€ SOLD
A pretty early Morris and a very nice looking Martin D-45 copy, made by Terada in Japan, the factory that makes Gretsch and Orville. Solid spruce top with a really nice 3-piece back of Brazilian rosewood and maple. The inlays are real abalone hexagon inlays and I still have the original machine heads if chrome is preferred to gold. It has it’s fair share of scratches and has been played a lot over the past 42 years but it has no cracks or issues. The neck is straight, trussrod works and the action is low. The sound is just amazing, really deep bass but with good clarity and great projection. It has a endpin jack fitted and a strap button so it’s ready to be gigged with straight away, just fit a pickup. It’s still one of my favourites but now I have too many Morris guitars and have to get rid of some. You can read more about the guitar here and listen to it in this Youtube clip.

Morris WL-35 Made in Japan 1970'sMorris WL-35, Made in Japan 1970’s, 400€ SOLD
A really cool looking Johnny Cash Guild copy. It’s in great condition except for one flaw, the end pin has been pushed in at one point and cracked the lacquer. It’s not as bad as it sounds and it doesn’t really affect anything but I thought it would be worth mentioning. I’m pretty sure it’s mahogany back and sides, it has a really warm and nice sound and is a great playing guitar. It has a endpin jack fitted and a strap button so it’s ready to be gigged with straight away, just fit a pickup. You can read more about the guitar here and listen to it in this Youtube clip.

K.Yairi TG-40 Made in Japan 1977K. Yairi TG-40, Made in Japan 1977, 700€ SOLD
A very rare and unique K. Yairi copy of the famous Guild D-40, which itself was introduced in the Sixties as a competitor to Gibson’s J-45. The Guild D-40 became famous as the Bluegrass guitar for their even response over all the strings and I have to say that this K. Yairi TG-40 sounds amazing. Solid spruce top, sides and back in solid mahogany, neck in Honduras mahogany, bridge and Fretboard in black ebony. The guitar is all original except for the pickguard, which was replaced with an official Guild pickguard, the old one was cracked. It has an end pin jack and strap button fitted and at the moment Wilkinson WJ-309 Art Deco machine heads in gold but I still have the original machine heads if chrome is preferred to gold. The top and back has a few scratches but no structural issues. It plays really well and has an amazing tone, very loud and clear with a great punch in the mid-range. You can read more about the guitar here and listen to it in this Youtube clip.

K. Yairi YW-130 Made in Japan 1977K. Yairi YW-130, Made in Japan 1977, 550€ SOLD
This is a quite accurate Martin D-28 copy made in Japan by K. Yairi in 1977. It’s really light and beautiful sounding, very responsive and a joy to play. Solid spruce top, rosewood back and sides with a smooth ebony fretboard. It has it’s fair share of scratches and a couple of dents to the top but no cracks or issues. The neck is straight, trussrod works and the action is low. The sound is great, very clear with great harmonics. It has a strap button fitted and at the moment Wilkinson open back machine heads in gold but I still have the original machine heads if chrome is preferred to gold. You can read more about the guitar here and listen to it in this Youtube clip.

IMG_9283Levin Model 13 Ambassadör, Made in Sweden 1950, 600€ SOLD
This is a beautiful Levin Model 13 Ambassadör, hand built in Gothenburg Sweden in 1950. If you are not familiar with this classic Swedish brand Levin, click on the link to read more about it. It was restored a few years ago by GammelGura, a great luthier in Örnsköldsvik, Sweden. With new bronze frets, a neck re-set, cracks glued and a new bridge was created to improve the intonation, the rest is all original. It even has the sticker on the back of the head from the guitar shop in Örnsköldsvik where the guitar was bought 65 years ago. It’s a fairly small ladder braced 12-fret guitar with a big sound because of the body width, 400 mm. All solid woods, as always with Levin. Spruce top, walnut back and sides, 4-ply bound top, single-bound back. Mahogany neck with non-adjustable T-shaped duraluminum truss rod. Single-bound rosewood fingerboard with 18 frets and pearloid dot inlay. Single-bound headstock, rosewood bridge, nickel plated individual tuners. Sunburst finish, very similar to the Gibson sunburst of the 1940-50’s, and 10 years warranty. You can read more about the guitar here and listen to it in this Youtube clip.

Levin Model 65 parlour guitar Made in Sweden 1942Levin Model 65, Made in Sweden in 1942, 550€ SOLD
A nice little parlour guitar from Levin, made during World War II in Gothenburg Sweden. It’s just 315 mm wide so it’s a perfect little ladder braced blues machine. All solid woods, spruce top, birch back and sides with walnut fretboard, brass machine heads and nickel plated tailpiece. The guitar is all original, I carved a new bridge for lowering the action but the original will be included in the sale. The neck is really fat and nice and feels great to play. A perfect parlour for blues picking. You can read more about the guitar here and listen to it in this Youtube clip.

Hagström Western 6 Made in Sweden 1978Hagström Western 6, Made in Sweden in 1978, 650€ SOLD
A very rare Hagström Western 6 Missouri made in 1978 by Bjärton in Bjärnum in the south of Sweden. Bjärton were the second largest guitar manufacturers in Sweden after Levin, and they produced all the acoustic instruments for Hagström. It’s both stunning to look at, a joy to play and it sounds great. It has the same head, fretboard and inlays as the legendary Hagström Suede electric guitars had in the 1970’s. Spruce top with X-bracing, mahogany back and sides. 4-ply bound top and bound back. Unbound ebony fingerboard, rosewood bridge, mahogany neck. Matte natural finish and 10 year warranty, which was only give to the top end models. You can read more about the guitar here and listen to it in this Youtube clip.

Hagström B-60 Made in Sweden 1975Hagström B-60, Made in Sweden by Bjärton in 1975, 500€ SOLD
This great looking Gibson J-50 copy was made in 1975 by Bjärton in Bjärnum in the south of Sweden. Bjärton were the second largest guitar manufacturers in Sweden after Levin, and they produced all the acoustic instruments for Hagström. It’s made out of all solid woods and it’s a very nice sounding guitar, even though it has a bolt-on neck, I guess the solid woods and massive neck block is helping with the sound. Spruce top with X-bracing, mahogany back and sides with a nice mahogany bolt-on neck, unbound rosewood fingerboard, Single-bound top and back, rosewood pin bridge. Van Gent machine heads, just like Levin, natural finish and 10 year warranty, which was only give to the top end models. You can read more about the guitar here and listen to it in this Youtube clip.

Fuji F310

Fuji F310, Kurosawa by Matsumoto Made in JapanFuji F310, made by Kurosawa guitar in Matsumoto, Japan

I recently found a little Fuji F310, a 000-sized Japan made acoustic. The guitar was made by Kurosawa guitar in the Matsumoku factory in the late 1960’s. It says Matsumoto factory on the label and that seems to have been the original name of the Matsumoku factory before they grew too big and had to move, the old Matsumoku factory was in the city of Matsumoto. It’s in great shape for the age and has a great tone, these folk sized Japanese acoustics are pretty hard to come by, especially here in Spain. It’s made with really nice looking tone woods, the rosewood back is beautiful and so is the fretboard. The neck is really fat and feels great, a bit like a 58′ Les Paul and if I needed another 000 I would have kept it myself but I have three Levin guitars in this size. I bought the Fuji F310 for my wife but her hands are too small for the neck and therefore it’s up for sale.

Fuji F310, Kurosawa by Matsumoto Made in JapanFuji F310, Kurosawa by Matsumoto Made in JapanA changed the bridge pins and put in a bone saddle, straightened up the neck and polished the frets. There was a pretty nasty dent on the back of the neck, close to the body, that I filled, painted and lacquered over.