Sonora parlour

by claesgellerbrink

Sonora parlour guitar Made in Germany 1920-30'sSonora parlour guitar made in Germany 1920-30’s

I’ve recently managed to do some more work to the Sonora parlour. I decided to reset the neck to try to get rid of the banana neck and high action and it worked pretty well. I also redesigned the fretboard and added some wooden dot markers. Now the action is low and the guitar is easy to play.

Sonora parlour guitar Made in Germany 1920-30'sSonora parlour guitar Made in Germany 1920-30'sThe new Sonora parlour and here is what she looked like before

Sonora parlour guitar Made in Germany 1920-30'sMy initial plan was to steam the neck off by drilling two small holes under the 13th fret and that way get steam straight in to the dove tail. That didn’t work, I think it was too much old glue stuck in the joint and also the needle tip I used for my home built steamer was too thin. I decided to remove the whole fretboard instead, I used a spatula heated on a normal clothes iron which worked like a charm. Once the fretboard was off I could just steam the hell out of that joint and eventually the glue softened and then neck came off.

Sonora parlour guitar Made in Germany 1920-30'sNext I had to try to remove the hump on the fretboard where the neck and body meet. I removed all the frets, and kept them in the correct order to make it easier to reinstall them later. To get rid of the hump I had to remove almost 6 mm of the overhang and then sand the rest to get the fretboard straight. 

Sonora parlour guitar Made in Germany 1920-30'sI re-cut all the fret slots, reinstalled the frets and added four wooden dots in different grain directions as position markers. I gave the fretboard a coat of lacquer and then painted everything black except for the 3rd, 5th, 7th, 9th and 12th fret. I added a layer of lacquer on top and then sanded it smooth and polished out the frets again.

Advertisements